AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryFlying lead (lead-out wire type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI)
A 3/2 valve has exactly three ports - supply, outlet, exhaust - and exactly two states. This one is normally open: until the AC24V coil is energised the outlet is fed from supply and the exhaust is shut; power it and the outlet closes while trapped air dumps to exhaust. On a single-acting, spring-return cylinder that gives you an actuator which sits under air when the machine is off and only retracts when the control system commands it.
The I suffix marks the flying-lead entry: the coil arrives with its leads pre-wired, so you terminate them straight onto terminals instead of plugging in a DIN connector. This is a genuine AirTAC 3V110 with a 1/8in PT port. The same body is offered normally closed, in four other coil voltages, with DIN plug entry, and on 3V-F manifold bases; ask on the RFQ for any datasheet figure this page leaves out.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally open |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI) Is Used
Filler nozzle lift
Holds a single-acting nozzle lift on a bottling line up under air while the line controls are down, venting it only when the AC24V coil is commanded.
Junction-box wiring
Suits a control panel retrofit where pre-wired coil leads land directly on terminal strips, with no DIN connector to order or seat.
Fume-hood damper
Drives a spring-return damper actuator on a laboratory fume hood so the damper falls open on control failure, powered from the building's 24V AC circuit.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI) the Right Part?
Order NO when the process must run on air through a power loss and NC when it must shut; the suffix decides the de-energised state, so pick it from your fail-safe requirement before anything else. The 06 port is 1/8in PT thread - the standard thread on this family - with G and NPT available to order if your pipework needs them.
Wiring is where this version differs: the I suffix brings flying leads out of the AC24V coil, so you land them on terminals directly and skip the DIN connector entirely. One air-side note: a 3/2 valve cannot stroke a double-acting cylinder in both directions, which takes a 5-port AirTAC 4V valve. Since this family's flow figures are not in our hands, let us check the valve against your cylinder before ordering - or step to the documented AirTAC 3V2 or 3V3 bodies if published flow and coil power are a requirement today. Manifold mounting on a 3V-F base is available if you would rather feed several valves from one supply.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI) FAQ
Yes - put the question in your RFQ and we will confirm the datasheet values for this valve directly with you, since none are printed here. If you would rather not wait on a number, the AirTAC 3V2 and 3V3 bodies are the ones in the range with published flow and coil-power figures.
The I suffix means the coil's leads arrive pre-wired for direct termination; versions without it take a DIN plug instead. For several valves on one shared supply and one wiring loom, mount them on a 3V-F manifold base and order the valves separately.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOEI)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.