AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageDC12V
- Electrical entryFlying lead (lead-out wire type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI)
This 3/2 valve gives an outlet two possible conditions: fed from supply, or open to exhaust. As a normally open part it sits in the first condition with the DC12V coil off, then switches to exhaust when energised. A spring-return cylinder wired this way stays under air pressure if the vehicle or machine loses power - useful for clamps and lifts that must not drop.
The trailing I in the code is the wiring clue: flying leads come out of the coil, ready for a terminal strip or a sealed connector, with no DIN plug to buy or seat. It is a genuine AirTAC valve with 1/8in PT ports, part of a family that also offers normally closed, four other voltages, DIN plug entry and 3V-F manifold bases. Datasheet numbers - pressure, flow, coil rating - come on request through the RFQ.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally open |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI) Is Used
Parcel diverter
Throws a spring-biased diverter flap on a small parcels conveyor to its air side, staying deflected through a control outage because the coil is off.
Portable hold-down
Holds timber down on a site-built saw jig with a pneumatic clamp fed from a 12V battery pack, releasing the moment the coil is energised.
Bay dust purge
Runs a dust-purge lance in an equipment repair bay off the vehicle's 12V outlet, with air available at the gun whenever the ignition circuit is dead.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI) the Right Part?
Decide the fail state first: normally open keeps the outlet fed with the coil off, normally closed shuts it - this code is the NO version, so an unpowered machine still delivers air at the 1/8in outlet. Check the coil before anything else: DC12V is fixed at order time and only matches a 12V supply, so a 24V panel needs a different suffix on the same body. The port is 1/8in PT as standard, the smallest common step below 1/4in; G and NPT threads are order options.
Flying leads suit retrofits and mobile builds where there is no DIN socket to plug into - strip, land on terminals, done. Remember the limits of the format: one outlet means a 3/2 valve can feed a single-acting cylinder or a jet, but never a double-acting one; that is an AirTAC 4V series job. Flow and coil-power figures for this family are not published here, so put the actuator details in your RFQ and we will confirm sizing from the datasheet - or move to the documented 3V2 and 3V3 bodies if you need printed numbers now. Several of these valves can share a 3V-F manifold base and a single air feed.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI) FAQ
Not on this page. Pressure, flow and coil power come from the AirTAC datasheet, which we will check and confirm for you through the RFQ; alternatively the documented AirTAC 3V2 and 3V3 series carry printed flow and coil-power figures.
One 3/2 valve feeds one outlet at a time - a single-acting cylinder, a jet or a pilot line - and never a double-acting cylinder, which needs the 5-port AirTAC 4V series. To run several valves from one shared air feed, order a 3V-F manifold base and mount the valves on it.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOFI)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.