Airtac 3V100 Solenoid Valve 3V110M5NCB
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCB is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCB
3V110M5NCB is the DC24V, normally closed build of AirTAC's 3V1-series 3/2 valve with an M5 port. Function first: three ports (supply, outlet, exhaust) and two states, so the valve either feeds the outlet or vents it. Normally closed pins down the unpowered behaviour - outlet blocked - so a 24V control system that trips leaves the actuator vented and still, with the actuator's own spring doing the moving.
This is a genuine AirTAC part, and the code fixes three of the choices: normally closed state, M5 port and a DC24V coil with DIN plug entry. DC24V is the usual pick for machine-side circuits fed from a PLC or a switched 24V supply. The family also offers AC220V, AC110V, AC24V and DC12V coils, a normally open state, flying-lead entry and 3V100M manifold bases. Pressure, flow and coil power are datasheet figures we do not print here - ask, and we will bring them back to you with the RFQ.
Airtac 3V100 Solenoid Valve 3V110M5NCB Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCB |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCB
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCB Is Used
Clamp during riveting or welding
Hold a bracket with a spring-return clamp while the riveter or weld gun works, and vent the clamp the instant the coil is dropped.
Guard-interlock venting
Wire the coil into a machine guard circuit so that opening the guard de-energises the valve and vents the small clamp or jet downstream.
Cleaning jet on a print head
Pulse a short burst of air across a printing or marking head between runs, with the valve venting the line the moment the pulse ends.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCB the Right Part?
DC24V and NC are a common pairing in machine building: the valve sits de-energised until the PLC or safety circuit calls for it, and any trip vents the actuator instead of holding it. Check the three decodable choices against your circuit - normally closed (outlet blocked until energised), M5 port (the family's smallest, for small single-acting cylinders, jets and pilot lines) and DC24V coil with a DIN plug that seats straight onto the coil.
Larger actuators need a larger port: the same family runs 1/8in, 1/4in and 3/8in codes, and multi-valve panels can sit several valves side by side on a 3V100M manifold base. One honest caveat on sizing: flow figures for this family are not published on this page and not in our possession, so confirm the match to your actuator with us before ordering - and if you want a 3-port valve whose flow and coil power are already documented, the AirTAC 3V2 and 3V3 bodies are the place to look. A double-acting cylinder is a job for the 5-port AirTAC 4V series. PT thread is the family standard; G and NPT are order options.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCB FAQ
Not on this page - for the 3V1 family those numbers live in the AirTAC datasheet, which we will happily quote from when you send the RFQ. If your drawing already calls for published flow and coil power, the AirTAC 3V2 and 3V3 bodies are the documented alternatives.
Normally closed (this code) blocks the outlet until the coil is energised; normally open passes air until energised. Pick NC when a power loss should leave the actuator vented. Either way a 3/2 valve handles single-acting, spring-return loads only - a double-acting cylinder needs air to both ports in turn, so move to the AirTAC 4V 5-port series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCB
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.