Airtac 3V100 Solenoid Valve 3V110M5NCBI
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCBI is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageDC24V
- Electrical entryFlying lead (lead-out wire type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCBI
Three ports, two states: the 3V110M5NCBI either feeds its M5 outlet from supply or vents the outlet to exhaust. With the NC state the outlet is vented until the DC24V coil is energised, so whatever it drives relaxes the moment power is removed - a natural fit for single-acting cylinders, blow nozzles and pilot lines. The I suffix in the code means a flying lead: the coil arrives with a pre-wired lead-out instead of a DIN socket, so no separate plug has to be ordered.
You are buying a genuine AirTAC component. Elsewhere in the 3V1 series you can select the normally open state, AC220V, AC110V, AC24V or DC12V coils, a DIN plug connection, and 3V-F manifold bases that carry several valves on one shared feed. The numbers we cannot quote here - pressure, flow, coil power - will be read out to you from the datasheet when you raise an RFQ.
Airtac 3V100 Solenoid Valve 3V110M5NCBI Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCBI |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCBI
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCBI Is Used
Pre-wired interlock on a packaging machine
A flying-lead coil drops straight into an existing machine harness, driving a guard interlock vent that releases whenever the 24V control circuit stops.
Venting a pneumatic stopper on a conveyor
A single-acting stopper cylinder drops clear of the product stream the moment the coil de-energises, because the normally closed outlet vents to exhaust.
Sample-chamber purge in a laboratory rig
An on/off purge air line that can be left de-energised and fully vented between test runs on a bench-top environmental chamber.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCBI the Right Part?
Decide the state first: NC vents the outlet on power loss, NO holds air through a power loss, and only one of those is the safe condition for your machine. The M5 outlet sizes this valve to compact single-acting work; a bigger actuator wants the 1/8in (06), 1/4in (08) or 3/8in (10) port instead. On wiring, compare the two entries honestly: a flying lead is the fastest to terminate in a pre-harnessed cabinet, while a DIN plug version is easier to swap without touching the loom. Coil voltage is fixed - DC24V here - and must match the supply, not be adapted to it. Flow and pressure figures for the 3V1 series are not ours to quote, so let us check sizing against your actuator from the datasheet before you order. Buyers who need published numbers immediately should look at the AirTAC 3V2 or 3V3 3-port bodies, and double-acting cylinders belong on the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCBI FAQ
None beyond the configuration on this page. Pressure range, flow, coil power and response details are confirmed from the AirTAC datasheet when you send the RFQ for the 3V110M5NCBI. If a datasheet in hand today matters more than this exact port, the AirTAC 3V2 and 3V3 3-port valves are the family members whose flow and coil power are already published.
Yes - order a 3V-F manifold base instead of individual bodies. The base is a machined block that carries a number of valves on one common supply and one wiring run, which cuts pipework and makes fault-finding simpler; the valves themselves are ordered separately to suit your station count. Base blocks carry no coil, so they have no voltage or state of their own.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCBI
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.