Airtac 3V100 Solenoid Valve 3V110M5NCCI
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCCI is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageAC110V
- Electrical entryFlying lead (lead-out wire type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCCI
The 3V110M5NCCI is a 3-port, 2-position solenoid valve in AirTAC's 3V1 family. Normally closed means the outlet stays connected to exhaust until the coil is energised, so a spring-return actuator held on this valve relaxes the moment power is lost. The M5 port is the smallest threaded connection in the range, suited to compact single-acting cylinders, small blow-off nozzles and pilot lines.
You are buying a genuine AirTAC part. This SKU pairs an AC110V coil with flying-lead entry, so the wires arrive ready to terminate rather than needing a plug socket. Across the 3V1 family you can also order normally open versions, AC220V, DC24V, AC24V and DC12V coils, DIN-plug entry, and 3V100M manifold bases. Pressure, flow and coil power are not published on this page; send your enquiry and we will read the figures off the datasheet for you.
Airtac 3V100 Solenoid Valve 3V110M5NCCI Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCCI |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCCI
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCCI Is Used
Bottle rinse blow-off
A short pulse of plant air clears dust and rinse droplets from PET bottles ahead of a filling head on a bottling line.
Drill fixture clamping
A spring-return clamp cylinder grips the workpiece while the coil is energised and releases the instant the panel cuts power.
Control cabinet retrofit
Flying leads terminate straight onto existing terminal strips in older 110V AC panels that have no valve plug sockets.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCCI the Right Part?
Decide the state first: normally closed is the fail-safe pick when the actuator must vent on power loss; choose normally open if the line must keep feeding during a blackout. At M5, match the valve to small actuators and short, small-bore lines - if your cylinder is larger, step up through the 1/8in, 1/4in and 3/8in port options in this family. The coil must match a 110V AC supply; voltage cannot be changed by rewiring.
We hold no published flow figures for this family, so ask us to check sizing against your cylinder before you order. If you need a 3-port valve with published flow and coil power right now, the documented 3V2 and 3V3 bodies are the alternative; for a double-acting cylinder you need a 5-port valve from the AirTAC 4V series instead.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCCI FAQ
We do not publish numbers for this family, but our engineers will confirm the datasheet figures on request - just include the SKU in an RFQ. If you need published flow and coil power before you enquire, the AirTAC 3V2 and 3V3 bodies are the fully documented alternative.
Normally closed means no air reaches the outlet until the AC110V coil is energised, and the outlet vents when power fails - the usual choice for fail-safe clamping. A 3/2 valve suits single-acting, spring-return cylinders and blow-off duty; it cannot drive a double-acting cylinder, which needs a 5-port AirTAC 4V valve.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCCI
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.