Airtac 3V100 Solenoid Valve 3V110M5NCF
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCF is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCF
The 3V110M5NCF is a genuine AirTAC 3/2 solenoid valve. Three ports and two states give a simple contract: energise the DC12V coil and air flows from supply to outlet; de-energise it and the outlet vents to exhaust. Normally closed, it is the natural switch for a spring-return actuator that must relax on power failure.
DC12V suits battery-backed panels and mobile machinery where the control supply is 12 volts DC. Entry is via DIN plug: the coil mounts on a socket and unplugs without tools. Elsewhere in the 3V1 family you will find normally open variants, AC coils at 220V, 110V and 24V, a DC24V option, flying-lead versions and 3V100M manifold bases. Pressure, flow and coil-draw figures are not on this page - put the SKU in an RFQ and we will return them from the datasheet.
Airtac 3V100 Solenoid Valve 3V110M5NCF Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCF |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCF
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCF Is Used
Tail-lift latch control
A 12V DC truck battery energises the valve to extend a spring-return latch cylinder, and the latch retracts the moment the switch opens.
Seeder row marker
On a tractor's 12V system, the valve lifts a spring-return marker arm at the headland and drops it when the coil de-energises.
Chip clearing at the lathe
A foot-switched valve pulses air through a small nozzle to blow swarf off the cutting zone between passes.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCF the Right Part?
Normally closed versus normally open is the first fork: NC for fail-vent, NO for fail-feed. The M5 port is the family's smallest connection, right for light-duty single-acting cylinders and blow guns; larger actuators call for the 1/8in, 1/4in or 3/8in port codes. Confirm your supply is 12V DC before ordering - coil voltage is fixed and cannot be adapted by rewiring.
Our pages for this family carry no flow or pressure numbers, so route sizing questions to us and we will answer from the datasheet. If you want a 3-port valve whose flow and coil power are already published, the AirTAC 3V2 and 3V3 bodies are the documented route, and a double-acting cylinder calls for the 5-port 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCF FAQ
No - we only publish configuration we can verify. Send the SKU in an RFQ and we will come back with the datasheet pressure, flow and coil figures. The AirTAC 3V2 and 3V3 bodies already publish those numbers if you need them before enquiring.
If the machine's control supply is 12V DC, this coil matches it directly - voltage is set at order time and cannot be rewired. DIN entry lets you unplug the connector for servicing. Remember a 3/2 valve handles single-acting or blow duties only; double-acting cylinders need the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCF
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.