AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE)
The AirTAC AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V210
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE)
The 3V21006NOE is a three-port, two-position solenoid valve in AirTAC's 3V2 series. Normally open means the outlet stays connected to supply while the coil is off, and the exhaust path opens when you energise it. That is the reverse of the usual NC logic, so it suits circuits where air must keep flowing through a power cut or a control fault.
This is a genuine AirTAC part with a 1/8in port, an AC24V coil and a DIN plug connection. Across the 3V1, 3V2 and 3V3 family you can also order normally closed valves, AC220V, AC110V, DC24V and DC12V coils, flying-lead entries and shared manifold bases. Flow, pressure and coil-power figures are not published on this page; send us the model code and we will confirm them from the datasheet.
AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE) Technical Specifications
| Model | AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE) |
|---|---|
| Series | 3V210 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally open |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE)
| 3V210 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE) Is Used
Suction-cup release
Switch a vacuum generator or vent a suction cup on a pick-and-place head, so the cup releases the part the moment the coil is energised.
Pneumatic clamping fixture
Feed a spring-return clamp cylinder on a milling fixture, where the clamp must stay held whenever control power is absent.
Blow-off station
Run an on/off air jet that clears chips and swarf from a machining table between cycles, controlled straight from the machine PLC.
Is the AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE) the Right Part?
Start from the fail-safe condition. Normally open means the outlet stays fed whenever the coil is off, so this valve suits circuits where a loss of control power must leave the actuator supplied. If the opposite is true - the actuator must vent on power loss - order the normally closed 3V210 instead. The 1/8in port is a step up from M5 and will feed a larger single-acting cylinder than an M5 body; 1/4in and 3/8in versions exist for still bigger actuators. The AC24V coil must match the control supply, and that choice is fixed at order time - it cannot be changed by rewiring. Wiring here is via DIN plug. If you would rather run one air feed and one loom to several valves, look at the 3V2 manifold bases. One caution: we hold no published flow figures for this family, so ask us to check the sizing against your actuator before you order - or compare the documented AirTAC 3V2 and 3V3 bodies, whose flow and coil power are published.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE) FAQ
Pressure range, flow (Cv or effective area) and coil power all come straight from the AirTAC datasheet, which we will send on request - this page deliberately quotes no figures. If you need a 3-port valve with published specifications in hand right now, the AirTAC 3V2 and 3V3 bodies are fully documented and worth comparing.
No. A 3/2 valve has only one outlet, so it suits single-acting (spring-return) cylinders, blow-off, clamping and pilot duty. A double-acting cylinder needs two outlet paths, which means a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V210-06 Solenoid Valve, 3V200 Series (3V21006NOE)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.