AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0)
The AirTAC AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Port size1/4 in
- Electrical entryDIN plug (DIN socket type)
- Series3V220
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0)
The AirTAC 3V22008-X0 belongs to the 3V220 line of 3/2 solenoid valves: three ports (supply, outlet, exhaust), two positions, so it either pressurises the outlet or vents it. With its 1/4in PT port it is the step you take when the single-acting actuator or blow-off job is too big for a 1/8in valve. The state and coil voltage are not decodable from this code, so the exact behaviour on power loss is settled at order time.
It is a genuine AirTAC part. The wider 3V1 / 3V2 / 3V3 family covers normally closed and normally open valves, five coil voltages, DIN plug and flying-lead entries, and 3V-F manifold bases. No pressure, flow or coil-power figures are published on this page - raise the RFQ and we will confirm them from the datasheet rather than quote numbers we cannot stand behind.
AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0) Technical Specifications
| Model | AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0) |
|---|---|
| Series | 3V220 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | Confirm from the datasheet — ask us |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0)
| 3V220 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0) Is Used
Small assembly press
Switches a single-acting pneumatic cylinder that presses a bearing or bushing into a housing on a light assembly station.
Carton stopper
Raises and lowers a pneumatic stopper that singles cartons out of a conveyor stream at a pack-out bench.
Lab automation clamping
Drives the spring-return clamp that holds a sample tray in place on an automated laboratory handling rig.
Is the AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0) the Right Part?
This listing fixes the 1/4in PT port and a DIN plug coil entry; the state and voltage segments are not decodable from the code, and the family offers both NC and NO plus all five voltages, so specify them when you order. A 1/4in port steps up from 1/8in and suits a larger single-acting cylinder or a heavier blow-off jet. On power loss, a normally closed valve vents the outlet while a normally open one keeps feeding it - choose the behaviour your machine needs as its fail-safe. Because flow figures for the 3V220 body are not published here, send us the actuator details and we will confirm sizing from the datasheet. If you need documented flow and coil-power numbers in hand today, the 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies are the fully specified route; a double-acting cylinder calls for the AirTAC 4V series instead.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0) FAQ
Not from this page - they are not in our hands for the 3V220 family. Raise an RFQ and our team will read the pressure, flow and coil-power values straight from the AirTAC datasheet. Buyers who need documented figures today are pointed at the 3V2 and 3V3 bodies.
Decide what must happen on power loss. A normally closed valve holds no air at the outlet until energised; a normally open valve keeps feeding until energised. Match that to your fail-safe position and order the matching state - both exist across this family.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008-X0)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.