AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W)
The AirTAC AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Port size1/4 in
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V220
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W)
Every 3/2 valve makes the same promise: it has a supply port, an outlet and an exhaust, and it puts the outlet on one or the other. The AirTAC 3V22008B-W applies that to a 1/4 inch body with a DC24V coil on a DIN plug - a configuration sized for spring-return cylinders, blow duties and pilot signals rather than small M5 circuits. What separates a good 3/2 purchase from a bad one is the state: whether the outlet sits dead (normally closed) or live (normally open) with the coil off, and that is the first question to settle for any fail-sensitive circuit.
This listing is for a genuine AirTAC part under the exact code shown. The family behind it covers both states, all five standard coil voltages, both electrical entries and the 3V-F manifold bases, so one series can serve a whole panel build. Datasheet numbers - pressure, flow, power, response, weight - are confirmed individually on request; nothing on this page is an estimate.
AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W) Technical Specifications
| Model | AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W) |
|---|---|
| Series | 3V220 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W)
| 3V220 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W) Is Used
Small stamping press
Feed a single-acting ram whose return stroke comes from its own spring, one valve per station.
CIP spray skid at a brewery
Switch the rinse lance feed on and off between clean-in-place wash cycles.
Idle-station purge on a food conveyor
A timed blast of air clears debris from the belt beneath a transfer point during stops.
Is the AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W) the Right Part?
Start with the fail-safe question: do you want the outlet to lose air or keep air when power drops? Order the matching state code and the valve enforces that behaviour automatically. The 1/4 inch port gives headroom over 1/8 inch for bigger single-acting actuators and fuller blow lines; PT is the family-standard thread, with G and NPT available to order. Wiring is a DIN plug on this SKU - if your cabinet prefers coils that arrive pre-wired, the same body exists with a flying lead. One hard rule: a 3/2 valve drives single-acting loads only; a double-acting cylinder needs the 5-port AirTAC 4V series. Since we hold no published flow figures for this family, send your actuator size for a sizing check before ordering - and if published figures are a must-have today, the documented 3V2 and 3V3 bodies carry them.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W) FAQ
Yes - on request. Pressure range, flow, coil power, response time and the rest of the datasheet are confirmed to you by our team when you send an RFQ; we do not print numbers here that we cannot verify. If you need those figures published upfront, the AirTAC 3V2 and 3V3 3-port bodies are documented alternatives.
A 3V-F base is a machined manifold block that carries several 3/2 valves on one shared air supply and one wiring loom, with the valves themselves ordered separately. Fewer individual feeds means tidier panels and faster fault-finding: you isolate a station without disturbing the rest. Ask us to quote base plus valves as a set.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008B-W)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.