AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0)
The AirTAC AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Port size1/4 in
- Electrical entryDIN plug (DIN socket type)
- Series3V320
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0)
The AirTAC 3V32008-X0 is a three-port, two-position (3/2) solenoid valve with 1/4 inch PT ports. Three ports mean supply, outlet and exhaust; two positions mean the outlet is either fed from supply or vented to exhaust. A 1/4 inch port sits a size above the 1/8 inch bodies of this family, so it is the usual pick when a single-acting actuator or a blow line has a heavier air path requirement. The code carries no NC or NO marker, so the state is selected at order stage; both states exist across the family.
It is a genuine AirTAC part. Across the 3V1, 3V2 and 3V3 family you can order either state, any of five coil voltages, DIN plug or flying-lead entry, and 3V-F manifold bases from 1 to 20 stations. We hold no published pressure, flow or coil-power figures for these bodies in-house; raise the RFQ and our engineers will read the numbers back to you from the datasheet.
AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0) Technical Specifications
| Model | AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0) |
|---|---|
| Series | 3V320 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | Confirm from the datasheet — ask us |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0)
| 3V320 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0) Is Used
Fixture clamping
Feeding a single-acting clamp cylinder on a welding fixture, and venting it the moment the solenoid drops out.
Chip blow-off
Switching a blow nozzle that clears swarf off a bench-drill table between parts.
Pilot stage
Sending an on/off air signal to a larger process valve on a bottling line instead of running heavy actuation air to the panel.
Is the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0) the Right Part?
Because this code does not lock in a state, decide first whether the outlet must be dead on power loss (normally closed) or must keep feeding (normally open). Both exist in the family. Next, the coil voltage has to match your panel supply - DC24V, AC110V, AC220V, AC24V or DC12V - and it is fixed at order stage, not changeable by rewiring. Choose a DIN plug for a panel socket or a flying lead where the valve sits away from a socket.
Ask us to confirm sizing against your actuator before you order, since we cannot quote flow for this family here. If you need a 3-port valve with published flow and coil power in hand today, the AirTAC 3V2 (1/8 and 1/4 inch) and 3V3 (1/4 inch) bodies carry those figures. If the job is a double-acting cylinder, that needs a 5-port valve - go to the AirTAC 4V series instead.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0) FAQ
Pressure range, flow, coil power and any other datasheet figures are confirmed by our team on request through the RFQ. These bodies are not documented on this page. If you need published numbers in hand right now, the AirTAC 3V2 and 3V3 series have documented specifications.
No. A 3/2 valve has one outlet, so it can only feed or vent a single-acting, spring-return actuator. A double-acting cylinder needs pressurised air at both ports, which means a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008-X0)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.