
The AirTAC AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
The 3V32008B is an AirTAC 3/2 solenoid valve: three ports (supply, outlet, exhaust) and two positions, so the 1/4 inch PT outlet is either connected to supply or dumped to exhaust. This variant carries a DC24V coil with DIN plug entry, which suits a machine wired for 24 volt control - the common voltage on PLC panels - and lets you unplug the coil from its socket without touching screw terminals.
A genuine AirTAC part, ordered exactly as coded. Elsewhere in the 3V1 / 3V2 / 3V3 range you will find the other state (this code does not fix NC or NO, so confirm your choice at order), four further coil voltages, flying-lead entry, and 3V-F manifold bases up to 20 stations. Pressure, flow and coil-power figures are not published on this page; ask through the RFQ and we will supply them from the datasheet.
| Model | AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B) |
|---|---|
| Series | 3V320 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V320 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Extending and venting a spring-return stopper blade that halts cartons at a packing station.
Turning a glue or sealant air gun on and off at an operator's bench between beads.
Dumping clamp air the instant a power-press guard is opened, so the tool cannot cycle.
Check two things against your machine before ordering. First, the coil: 24VDC must be what your panel actually delivers - a coil is wound for one voltage and cannot be converted by wiring. Second, the state: this code leaves NC or NO open, so decide what the outlet should do when power is lost and tell us. A normally closed valve gives no air until energised; a normally open one keeps feeding until energised.
We cannot quote flow for this family, so ask us to check the 1/4 inch port against your cylinder before you commit. Where documented figures matter today, the AirTAC 3V2 and 3V3 3-port bodies carry published flow and coil power. Driving a double-acting cylinder is outside what any 3/2 can do - that job belongs to the 5-port AirTAC 4V series.
Confirm before you order
Anything in the AirTAC datasheet - pressure limits, flow and coil power - we will confirm for you on request via the RFQ. This page carries no such numbers. If you want them published up front, look at the documented AirTAC 3V2 and 3V3 series.
Pick normally closed if the outlet must stay dead when the coil is off; pick normally open if it must keep feeding. This code does not fix the state, so state your choice when ordering. Note that either way, a 3/2 valve feeds or vents a single-acting cylinder only - a double-acting cylinder needs a 5-port valve like the AirTAC 4V.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.