AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C)
The AirTAC AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C) is a genuine 3-port 2-position (3/2) solenoid valve with 3/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Port size3/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Series3V320
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C)
The 3V32010C is a genuine AirTAC 3-port, 2-position solenoid valve with a 3/8in port. A 3/2 valve works by either feeding air to the outlet or venting that outlet to exhaust, which is exactly what a spring-return cylinder or an air-blow point needs. This code carries an AC110V coil on a DIN plug entry, so it drops straight into a panel where 110V AC is the switched control voltage. The code does not carry an NC or NO marker, so tell us which initial state your circuit needs: normally closed leaves the outlet vented until the coil is energised, normally open feeds it until energised.
This is an authentic AirTAC component from the 3V1 / 3V2 / 3V3 family, which also covers the opposite state, five coil voltages, flying-lead versions and 3V-F manifold bases for mounting several valves on one supply. We do not publish performance figures for this series on this page; send an RFQ and we will read the pressure, flow and coil-power data off the datasheet for you.
AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C) Technical Specifications
| Model | AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C) |
|---|---|
| Series | 3V320 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 3/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C)
| 3V320 | Body. |
|---|---|
| 3/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C) Is Used
Pneumatic press clamp on a stamping fixture
Switching a spring-return clamp cylinder that holds a sheet-metal blank while a press cycle runs, venting it safely at the end of the stroke.
Blow-off on a packaging line
A 3/8in outlet giving an on/off blast of shop air to clear crumbs or dust from trays and webs between stations.
Gate and chute interlocking
Driving a single-acting pin or latch on a hopper gate, where the spring side of the actuator takes over the moment the coil drops out.
Is the AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C) the Right Part?
The 3/8in port is the largest step in this family, so it suits a bigger single-acting cylinder than the 1/8in and 1/4in options. A 3/2 valve cannot reverse a double-acting cylinder - that job needs a 5-port valve such as the AirTAC 4V series. Match the coil to your panel: this SKU is AC110V and the winding cannot be rewired to another voltage, so order a different suffix if your supply differs. DIN plug entry keeps the wiring at the valve body; flying-lead versions exist elsewhere in the family.
Published flow figures for the 3V320 are not in our hands, so ask us to check sizing against your actuator before you commit. If you want a 3-port valve with flow and coil power already published, the documented 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies carry those numbers.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C) FAQ
Those figures are not published on this page, so we confirm pressure range, flow and coil power from the AirTAC datasheet when you send an RFQ. If you need documented numbers in front of you today, the AirTAC 3V2 and 3V3 bodies have published flow and coil-power figures and may cover your port requirement.
No. A 3/2 valve has only supply, outlet and exhaust, so it can drive a single-acting, spring-return cylinder or a blow point but cannot push and pull a double-acting cylinder. For that, use a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V320-10 Solenoid Valve, 3V300 Series (3V32010C)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.