Airtac ACED Double-acting Compact Cylinder ACED40X90SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED40X90SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø40mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ40 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED40X90SB
A double acting compact cylinder built to ISO 21287, the ACED40X90SB pushes a 12 mm rod out of BOTH covers, so its 40 mm bore delivers an identical 571.8 N at 0.5 MPa in each direction - there is no weaker pull stroke. This S-coded unit carries the optional magnet, so CMSE or DMSE reed and solid-state switches can be clipped onto the body for end-of-stroke signalling, and the B code gives a male rod thread for direct linkage attachment.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs, guarding and gantry frames. A fixed TPU bumper at each end absorbs stroke-end shock, the S45C hard-chrome rod resists wear, and speed runs 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED40X90SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED40X90SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 572 N |
| 0.7 MPa | 800 N |
| Max (@1.0 MPa) | 117 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED40X90SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED40X90SB Is Used
Fixture clamping on CNC pallets
The 571.8 N clamping force in both directions lets one ACED40X90SB push a pallet locators from either side, and the male rod thread takes a custom clamp tip directly.
Bidirectional product pusher
A rod at each cover means the same 800.5 N at 0.7 MPa rejects cartons whether the cylinder extends or retracts - no derating for the pull side.
Position-flagged lift column
With the fitted magnet and CMSE switches on both ends, the 90 mm stroke reports extend and retract positions, while the through-rod resists rotation on a vertical lift of about 29 kg.
Is the Airtac ACED Double-acting Compact Cylinder ACED40X90SB the Right Cylinder?
At 571.8 N per direction, this 40 mm bore sits between the 32 mm ACED (345.6 N) and the 50 mm ACED (881.2 N) at 0.5 MPa - step down if your load is under 300 N, step up past 550 N. The 90 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so it ships as a catalogue item. Remember that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and the through-rod at the rear can carry a sensor flag.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED40X90SB FAQ
Because a rod exits both covers, both strokes use the rod-side area: 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa, equal in extend and retract. Maximum force at 1.0 MPa is 116.6 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.
The ISO 21287 short body cuts mounting length by roughly half versus an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The S in ACED40X90SB means the optional magnet is fitted, so CMSE or DMSE switches can be mounted on the body slots; models ordered without -S carry no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED40X90SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.