Airtac ACED Double-acting Compact Cylinder ACED50X175SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X175SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X175SB
The ACED50X175SB is a double acting, double-rod compact cylinder built to ISO 21287: a 16 mm hard-chrome S45C rod exits BOTH covers, so thrust is identical on the extend and return strokes. At the bore 50 size that is 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa in either direction, with a peak of 179.7 kgf at 1.0 MPa. The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 175 mm stroke still fits shallow jigs and guarded gantries.
Because the through-rod resists rotation and side load, it suits symmetric tooling: the rear rod can carry a sensor flag or a second fixture plate while the front rod does the work. The male rod thread (B code) takes standard rod accessories, the 1/8" PT port feeds both chambers, and the fitted -S magnet lets CMSE / DMSE switches report end positions. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED50X175SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X175SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X175SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X175SB Is Used
Symmetric press-and-transfer jig
The through-rod lets one 175 mm stroke press a bearing into a housing on the front rod while the rear rod ejects the finished part, with 881.2 N available on each side at 0.5 MPa.
Packaging line pusher gate
Equal force in both directions means the same 1233.7 N at 0.7 MPa pushes cartons off the belt on extend and retracts the gate with identical authority, and the fitted magnet feeds CMSE switch signals to the PLC.
Pallet-stacker clamp arm
A rear rod acting as a guide resists the side load of clamping shrink-wrapped pallets, while the roughly 45 kg vertical-lift margin at 0.5 MPa covers the arm and product weight.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X175SB the Right Cylinder?
Size up or down by real force: the 40 mm ACED gives 571.8 N at 0.5 MPa, while the 63 mm ACED reaches 1458.1 N, so the 50 mm sits mid-range at 881.2 N both ways. The 175 mm stroke is within the 250 mm standard for this bore, so no made-to-order build is needed. Remember that a plain double-rod cylinder drifts when air is lost - for a held vertical load add a rod lock or pilot check valve. Mount with FA/FB flanges, LB foot or FTC brackets, and add I or Y rod knuckles on the male thread; the fitted -S magnet pairs with CMSE / DMSE switches for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X175SB FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so output is equal either way: 881.2 N at 0.5 MPa, 1233.7 N at 0.7 MPa, and up to 179.7 kgf at the 1.0 MPa maximum. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, running at 30-500 mm/s on air filtered to 40 um.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so the 175 mm stroke fits compact fixtures. This version carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped anywhere along the body slots for end-of-stroke or mid-stroke detection. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FA/FB flange, LB foot or FTC mounting bolts straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X175SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.