Airtac ACED Double-acting Compact Cylinder ACED50X200B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X200B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X200B
A double acting compact cylinder built to ISO 21287, the ACED50X200B pushes a 16 mm hard-chrome rod out of BOTH covers, so thrust is identical on every stroke: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, whichever end you feed. The male rod thread (B code) on each end suits external knuckles and tooling plates, and the fixed TPU bumper at both ends takes the end-of-stroke shock.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight gantries and slide assemblies. The hard-anodized aluminium body with roller-burnished bore and the S45C rod run at 30-500 mm/s on air filtered to 40 um, 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED50X200B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X200B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X200B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X200B Is Used
Reciprocating conveyor pushers
The rear rod on the ACED50X200B lets you mount a sensor flag or counterweight behind the cylinder while the front rod pushes cartons across a transfer plate with 881.2 N at 0.5 MPa over a 200 mm stroke.
Press-fit stamping nest
Equal force in both directions makes return strokes as strong as the press stroke, useful when withdrawing a mandrel from a bushing press fixture that grips back on the rod.
Dual-sided weld fixture clamp
A rod through both covers gives a symmetric mount on a weld cell fixture: clamp from one end, carry a position flag from the other, with the 16 mm rod resisting rotation and side load.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X200B the Right Cylinder?
At 881.2 N per side at 0.5 MPa, the 50 mm bore sits between the 40 mm (571.8 N) and the 63 mm (1458.1 N); step down for lighter slides, up for heavier presses. Note this is a through-rod cylinder, not a position holder: if the load must stay put on air loss, add a rod lock or pilot check valve. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the male threaded ends. This unit has no magnet; order the -S code instead if you need CMSE / DMSE switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X200B FAQ
Because a rod exits both covers, output is the rod-side area in both directions: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, equal push and pull, with a maximum of 179.7 kgf at 1.0 MPa. Stroke is 200 mm on the 50 mm bore (max standard 250 mm), speed range 30-500 mm/s, pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi).
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, roller-burnished bore, S45C hard-chrome plated rod and a fixed TPU bumper at each end that only decelerates the stroke ends. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Sensing requires the optional -S magnet code; this unit (no S) has no magnet, so no CMSE or DMSE switch can be mounted. Ports are 1/8" PT and the rod ends carry male threads; outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X200B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.