Airtac ACED Double-acting Compact Cylinder ACED50X200SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X200SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X200SB
A double acting compact cylinder built to ISO 21287, the ACED50X200SB pushes a 16 mm hard-chromed rod out of BOTH covers, so thrust is identical on every stroke: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, whichever end you feed. The male rod thread (B code) and the fitted -S magnet for CMSE / DMSE switches come ready on this 200 mm stroke unit.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarded gantries. Because the through-rod resists rotation and side load, the free back rod can carry a sensor flag or a second tool. Fixed TPU bumpers at both ends absorb end-of-stroke shock, and speed runs 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED50X200SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X200SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X200SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X200SB Is Used
Symmetric push-pull on a packaging line
The double rod drives a carton rejector or pusher arm with equal 881.2 N force on extend and retract, so the same stroke quality is guaranteed in both directions at 30-500 mm/s.
Position-flagged fixture clamping
With the -S magnet fitted, CMSE or DMSE switches read end positions directly on the body, while the rear rod carries a mechanical flag for a second sensing point on the jig.
Vertical lift in a guarded assembly cell
The through-rod resists rotation on a 45 kg vertical lift, and the short body fits under a low gantry where a full-length ISO 15552 profile cylinder would not clear the frame.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X200SB the Right Cylinder?
At 50 mm bore you sit mid-range: a 40 mm ACED gives 571.8 N at 0.5 MPa while a 63 mm ACED reaches 1458.1 N, so step up only if your fixture needs the extra 570 N. The 200 mm stroke is inside the 250 mm standard limit for this bore, so no made-to-order build is required. Remember the piston drifts if air is lost - add a rod lock or pilot check when the load must stay put. FA/FB flange, LB foot and FTC brackets bolt straight to the ISO 21287 face; PT ports are standard and G is on request.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X200SB FAQ
Because a rod exits both covers, force is equal in both directions: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa on every stroke (rod-side area both ways). At the full 1.0 MPa rating the cylinder reaches about 179.7 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short body cuts mounting length by roughly half compared with an ISO 15552 profile cylinder, and fixed TPU bumpers at each end absorb end-of-stroke energy. This unit carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots; models ordered without the S code have no magnet. Mounting: FA/FB flange, LB foot, FTC, plus I and Y rod knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X200SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.