Airtac ACED Double-acting Compact Cylinder ACED50X35B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X35B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X35B
A double acting compact cylinder built to ISO 21287, the ACED50X35B pushes a 16 mm hard-chrome rod out of BOTH covers, so thrust is identical on every stroke: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, whichever way the piston travels. The 50 mm bore runs on 0.15-1.0 MPa (22-145 psi) of 40 um filtered air at 30-500 mm/s, with a fixed TPU bumper at each end absorbing stop energy.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight fixtures and guarded machines. Because the through-rod exits both ends, it resists rotation and side load and gives a symmetric mount - the rear rod can even carry a sensor flag. Planning a lift? At 0.5 MPa the rod-side area equates to roughly 90 kg of vertical pull, so size real work around 529 N (about 54 kg) to keep a healthy margin. Rod end is male thread (B code) and the port is 1/8".
Airtac ACED Double-acting Compact Cylinder ACED50X35B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X35B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X35B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X35B Is Used
Symmetric clamp fixtures
The 881.2 N equal-thrust through-rod clamps machined aluminium housings from a single body, letting one fixture face do both hold-down and support without a second cylinder.
Pusher gates on packaging lines
A 35 mm stroke diverts cartons between lanes at up to 500 mm/s, and the rear rod carries a flag so the line PLC reads gate position once the optional -S magnet is ordered.
Lab press and test rigs
With about 90 kg of vertical force equivalent at 0.5 MPa, the 50 mm bore suits bench-top sample presses where the compact body must fit under a fixed guard frame.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X35B the Right Cylinder?
At 881.2 N per direction, the 50 mm bore sits between the 40 mm (571.8 N) and 63 mm (1458.1 N) options - step down for lighter clamping, up when the load needs more than about 90 kg of pull. Remember the piston drifts if air is lost; add a rod lock or pilot check where a load must stay put. Mount with FA/FB flange, LB foot or FTC brackets plus I/Y rod knuckles on the ISO 21287 face. This version has no magnet: order the -S code if you want CMSE / DMSE switch position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X35B FAQ
Yes - it is a double-rod cylinder, so a rod exits both covers and both strokes use the rod-side area. Output is 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa in EITHER direction, with a maximum of 179.7 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port suits the 50 mm bore.
It follows ISO 21287, so the hard-anodized aluminium body is roughly 50% shorter in mounting length than an ISO 15552 profile cylinder - ideal where space is tight. A fixed TPU bumper at each end decelerates the piston at the stops. Mounting uses FA/FB flange, LB foot or FTC brackets with I/Y rod knuckles, and position sensing via CMSE / DMSE switches is possible only when you order the optional -S magnet code; this version ships without a magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X35B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.