Airtac ACED Double-acting Compact Cylinder ACED50X35SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X35SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X35SB
The ACED50X35SB is a double acting, double-rod compact cylinder built to ISO 21287: a 16 mm hard-chrome S45C rod exits both covers, so the 50 mm bore delivers an identical 881.2 N at 0.5 MPa (1233.7 N at 0.7 MPa) whether it pushes or pulls. The male rod thread (B code) takes an M10x1.5 knuckle, and the fitted -S magnet lets CMSE / DMSE switches report position along the body slots.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight printing-head and packaging gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the through-rod resists rotation and carries side load.
Airtac ACED Double-acting Compact Cylinder ACED50X35SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X35SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X35SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X35SB Is Used
Carton press-down station
The 881.2 N both-way force squares a carton flap on the push stroke and retracts the press head with equal power, all inside a 35 mm envelope that fits low packaging guards.
Fixture clamp with position feedback
Male M10x1.5 rod thread takes a knuckle for clamping jigs, while the fitted -S magnet and a CMSE switch confirm the clamp has fully seated before the cycle advances.
Counter-balanced slide carriage
A rod on each cover lets the back-end rod carry a guide or sensor flag while the front rod drives the carriage, keeping the symmetric mount rigid at 30-500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X35SB the Right Cylinder?
At 881.2 N per direction this bore sits between the 40 mm frame (571.8 N at 0.5 MPa) and the 63 mm frame (1458.1 N at 0.5 MPa), so step up only if your fixture needs the extra 16 mm rod and heavier duty. The 35 mm stroke is well inside the 250 mm standard range for bore 50. Remember the piston drifts if air is lost - add a rod lock or pilot check where a load must stay put. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and the -S magnet in this model is what enables CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X35SB FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port depends only on the 50 mm bore.
The compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures, and FA/FB flange, LB foot and FTC brackets bolt directly to its face. This ACED50X35SB carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for end-of-stroke or mid-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X35SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.