Airtac ACED Double-acting Compact Cylinder ACED63X110B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X110B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X110B
A double acting compact cylinder built to ISO 21287, the ACED63X110B drives a 16 mm rod out of BOTH covers, so its 63 mm bore delivers 1458.1 N at 0.5 MPa in each direction - the rod-side area works identically on both strokes. The through-rod also resists rotation and modest side load, and the free back-end rod is a handy mount for a sensor flag on conveyor stopper gates. At 0.7 MPa the same bore reaches 2041.3 N either way, with a peak of 297.4 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this model slots into tight press-to-fit and gantry fixtures. A fixed TPU bumper at each end absorbs end-of-stroke shock, the hard-anodized aluminium body carries 1/8" ports, and the B code gives a male M10x1.5 rod thread on both ends.
Airtac ACED Double-acting Compact Cylinder ACED63X110B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X110B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X110B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X110B Is Used
Conveyor stopper gates
The symmetric through-rod drives a stopper blade from either side of the line, with 1458.1 N enough to arrest cartons on a pallet conveyor without a larger 80 mm bore eating panel space.
Press-to-fit assembly stations
About 875 N of usable force at 0.5 MPa presses bushings into housings on an automotive subassembly line, and the 110 mm stroke clears part loading in a compact fixture.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X110B the Right Cylinder?
At 1458.1 N per direction, bore 63 sits between the 50 mm frame (881.2 N at 0.5 MPa) and the 80 mm frame (2356.2 N); step up only if your fixture needs over 2000 N. The 110 mm stroke is well inside the 250 mm standard limit for this bore, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. This code has no magnet, so CMSE / DMSE switches cannot be fitted; order the -S variant if you need position sensing, and pick FA/FB flange, LB foot or CA/CB clevis mounts plus I/Y rod knuckles to suit the fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X110B FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal both ways: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, peaking at 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, on air filtered to 40 um, at 30-500 mm/s and -20 to +70 C.
The ISO 21287 short body takes about 50% less mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke energy. FA/FB flanges, LB feet or CA/CB clevises bolt to the standard ISO 21287 face with I/Y rod knuckles. Position sensing needs the optional -S magnet code - this model has no magnet fitted, so CMSE / DMSE switches only work on the -S version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X110B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.