Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA
The AirTAC Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ20 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA
The B01-MI20X10CA is an application-dedicated variant of the AirTAC MI20X10CA, meaning the B01- prefix simply groups customer-specified builds while retaining the exact standard mechanics. This double-acting round-body mini cylinder utilizes a stainless-steel barrel and rod to resist mild corrosion in damp or washdown settings, a distinct advantage over painted alternatives. It pushes with 157 N and pulls with 131.9 N at 0.5 MPa.
Featuring a very short 10 mm stroke and a CA rear pivot cover, it fits neatly into tight mechanical linkages. The 1/8" port drives the 8 mm rod at speeds between 30 and 800 mm/s. Fixed TPU bumper pads soften the impact at stroke extremes, though this SKU lacks a magnet and cannot host CMSG or DMSG sensors.
Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA Technical Specifications
| Model | Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA Is Used
Gate Deflector Arms
Uses the CA pivot and 10 mm stroke to nudge small diverter gates on packaging lines, leveraging the 157 N push force to snap components into place rapidly.
Clamping Pins
Secures lightweight aluminum jigs during machining, applying 131.9 N of pull at 0.5 MPa to hold parts firmly without deforming the material.
Product Stops
Acts as a short-travel stop block on food-grade conveyors where the stainless steel construction prevents mild corrosion from routine washdowns.
Is the Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA the Right Cylinder?
When sizing this 20 mm bore unit, dropping down to a 16 mm bore reduces the push force to 100.5 N, whereas stepping up to a 25 mm bore increases it to 245.3 N at 0.5 MPa. The CA rear clevis is ideal for pivot-mounting applications, but remember that a plain cylinder drifts if air pressure is lost or the valve is centered; the TPU pads only decelerate the end of travel and act as neither a lock nor a brake. For suspended loads, integrate an external rod lock or pilot check valve.
Because this SKU lacks the -S magnet, position sensing is unavailable unless you upgrade to the -S variant for CMSG, DMSG or EMSG switches. The 10 mm stroke is well within the 500 mm maximum, keeping the rod highly resistant to bending, but always verify side-load alignment to maximize seal life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA FAQ
This 20 mm bore cylinder uses a 1/8" port. At 0.5 MPa it pushes with 157 N and pulls with 131.9 N. At 0.7 MPa the push is 219.8 N and the pull is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
The B01- prefix denotes an application-dedicated, customer-specified line of the base MI20X10CA, with zero mechanical differences to the standard model. Because this specific SKU lacks the -S suffix, it has no internal magnet and cannot support CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI20X10CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.