Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA
The AirTAC Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
About the Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The B01- prefix designates an application-dedicated, customer-specified variant of the MI25X100SCA, meaning it is mechanically identical to the base model but grouped for specific industry builds. It features a 25 mm bore, a 100 mm stroke, and a 1/8" air port.
The stainless-steel barrel and rod resist mild corrosion, making it superior to painted alternatives in damp environments. Its ISO 6432 mounting interface drops directly into standard mini-cylinder brackets and clevises. Plan for about 147 N of actual work at 0.5 MPa, which safely lifts roughly 12.5 kg vertically with a 2:1 margin. The integrated -S magnet supports CMSG, DMSG, and EMSG sensors, while fixed TPU bumper pads decelerate the stroke end without adjustable cushioning.
Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA Technical Specifications
| Model | Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA Is Used
Packaging Diverter
Pushes cartons at 90 degrees on a packaging line using the 245.3 N push force, with the CA clevis absorbing lateral pivot stress.
Textile Loom Tensioner
Maintains thread tension in humid textile facilities where the stainless-steel barrel prevents mild corrosion and rust buildup.
Pallet Gate Actuator
Opens and closes lightweight safety gates on palletizing stations, lifting components under the 12.5 kg vertical threshold.
Is the Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA the Right Cylinder?
When sizing this unit, stepping down to a 20 mm bore yields 157.0 N of push at 0.5 MPa, whereas stepping up to a 32 mm bore provides 402.2 N. This 25 mm model offers a strong middle ground. The rear CA pivot cover suits clevis mounting, and you can utilize LB foot, FA flange, or TC trunnion brackets. Because the -S magnet is present, you can directly mount position switches. Note that a standard cylinder drifts if air pressure drops; use an external rod lock or pilot check valve for load holding. With a 100 mm stroke, side-load alignment is necessary to prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
The B01- prefix marks this as an application-dedicated, customer-specified variant of the MI25X100SCA, sharing identical specs. It uses fixed TPU bumper pads to decelerate, not an adjustable cushion. It will drift on air loss, so you need a pilot check valve or rod lock to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MI Dedicated Pneumatic Cylinder B01-MI25X100SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.