Airtac B06-MI Battery Dedicated Cylinder B06-MI32X300SU
AirTAC B06-MI Battery-Powered Cylinder Specifications
- Model: B06-MI32X300SU
- Type: Rodless battery-driven linear actuator
- Bore size: 32mm
- Stroke: 300mm (±1mm tolerance)
- Operating pressure: 0.05-0.7 MPa (battery mode), 0.1-0.7 MPa (pneumatic hybrid mode)
- Battery voltage: 24VDC (built-in lithium pack with 3,000mAh capacity)
- Max thrust: 156N (at 0.5MPa)
- Speed range: 50-500mm/s (adjustable via PWM control)
- Repeat positioning accuracy: ±0.2mm
- Temperature range: -10℃ to 60℃ (with condensation prevention)
- Body material: Anodized aluminum alloy (AL6063-T5)
- Seal material: Heat-resistant NBR + wear-resistant guide ring
- Weight: 1.28kg (excluding battery), 1.45kg (with battery)
- Dimensions: 345mm(L) × 40mm(W) × 40mm(H) (stroke fully extended)
- Protection rating: IP54 (standard), IP67 optional
- Position feedback: Built-in magnetic sensor (PNP output)
Self-contained electro-pneumatic cylinder combining battery power with optional pneumatic assist. Features dual-mode operation (pure battery or hybrid) for mobile applications requiring 72-hour continuous operation. Integrated smart controller supports Modbus-RTU protocol for IoT integration.
- Mobile robotics (AGV lifting mechanisms)
- Outdoor solar tracking systems
- Portable medical equipment actuators
- Food truck automation systems
- Temporary assembly line setups
Installation note:
Requires horizontal mounting (±5° tolerance). Battery maintenance cycle:
Full discharge/recharge every 3 months when idle. Magnetic sensor calibration
must be performed after first 50mm of travel.
| Property | Property Value |
|---|---|
| sku | B06-MI32X300SU |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.