Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800
The AirTAC Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke800 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800
The AirTAC B06-SAID80X800 is a double-acting, double-rod ISO 15552 profile cylinder. The "B06-" prefix marks this as AirTAC's battery-manufacturing dedicated line, meaning it is mechanically identical to the standard SAID80X800 but designated for cell and pack assembly equipment. Because a rod exits both end covers, the annulus area is identical on both sides, yielding exactly 2268 N of force in both extend and retract directions at 0.5 MPa.
This twin-rod architecture allows you to mount the primary workpiece on the front rod and a position flag or cam on the rear rod for external sensing. It features a 25 mm carbon steel rod, a G3/8 PT port, and adjustable air cushions at both ends to decelerate the piston near stroke extremes.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800 Is Used
Battery Cell Stacking
Drives symmetric stacking mechanisms in battery cell production, utilizing equal extend and retract forces to handle delicate separators without speed variations.
Twin-Station Transfer
Actuates two synchronized workstations simultaneously by mounting a tool on the front rod end and a secondary mechanism on the rear rod end.
Anti-Rotation Guiding
Moves heavy battery module fixtures along a linear path, leveraging the double-rod geometry to resist torsional loads and prevent platform rotation.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800 the Right Cylinder?
Choose this 80 mm bore when an application requires symmetric force and speed both ways, stepping up from a 63 mm bore (1402 N at 0.5 MPa) or down from a 100 mm bore (3681 N). A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation or require rear-rod actuation. For direct replacements, it is dimensionally interchangeable per ISO 15552 using a G3/8 port, 25 mm rod thread M20x1.5, and mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
At 800 mm stroke, the unsupported rod length increases susceptibility to bending under side loads; use an external guide rail to support the load. Note that the adjustable cushions only decelerate the piston and do not hold the load if air pressure is lost. For position holding without live pressure, use an external rod lock or a BSAID clamp-lock cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800 FAQ
It provides 2268 N of force at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. Because it is a double-rod cylinder, the force is identical in both the extend and retract directions.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the SAID80X800. It is mechanically identical to the standard model, featuring the same ISO 15552 dimensions, G3/8 port, and 25 mm rod, but is designated for battery assembly lines.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.