This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X100 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X100 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X100, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X100
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100
The B06-SID80X100 is AirTAC's battery-manufacturing dedicated variant of the base SID80X100, mechanically identical to it. As a double-acting double-rod ISO 15552 cylinder, a rod exits both ends on one piston, meaning both faces use the rod-side area and push and pull force are equal both ways (2268 N @0.5 MPa, 3175 N @0.7 MPa, 4082 N @0.9 MPa). It features a 25 mm rod, M20x1.5 thread, G3/8 port, and 36 mm adjustable air cushions. This SID model is discontinued and end-of-life; the exact drop-in replacement is the SAID80X100, sharing the same ISO 15552 mounting interface, bore, stroke, and port.
The SAI replacement uses an upgraded piston seal with two Y-shaped one-way elements for long life and low start-up pressure. For sizing, the computed buyer insight from the 0.5 MPa rating yields a safe working load of roughly 1361 N (about 60% of 2268 N) and a vertical lift capacity of about 116 kg with a 2:1 margin. This non-magnet SKU (no -S suffix) cannot take a magnetic switch. A plain cylinder does not hold its load on air loss; the cushion only decelerates near stroke end, so for held loads use an external rod lock or SAIL/BSAI variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X100 |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X100 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X100 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100 Is Used
Battery Cell Stacking
Equal both-ways force drives precision stacking plates in prismatic cell assembly, ensuring consistent pressure on the upward and downward strokes.
Module Handling Transfer
The double-rod anti-rotation特性 keeps battery modules flat during conveyor transfer, preventing yaw while shifting packs between belt stations.
Tab Welding Clamp
Drives two opposing welding tools simultaneously from one piston, maintaining parallel clamping on battery tabs without requiring a second cylinder.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100 with the B06-SAID80X100
To replace the discontinued B06-SID80X100, drop in the SAID80X100 directly; it preserves the G3/8 port, 25 mm rod, M20x1.5 thread, and ISO 15552 mounting interface (Basic, FA, LB, TC, FTC, TCM1, TCM2) without mechanical changes. Size both ways by checking neighbour bores (63 mm or 100 mm) while remembering the double-rod design provides equal force in both directions (2268 N @0.5 MPa). Choose a double rod when you need anti-rotation stability or must drive two tools simultaneously from one piston. Because this SKU lacks the -S magnet, it cannot support legacy CS1-B/DS1-B sensors; confirm if the SAI replacement needs a -S suffix for sensing. For this 100 mm stroke, side-load is minimal, but for any stroke >=300 mm ensure guide alignment to prevent rod binding. Note that speed is 30-800 mm/s.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X100
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100 FAQ
Yes, the B06-SID80X100 (battery-manufacturing dedicated variant of SID80X100) is discontinued. The exact drop-in replacement is the SAID80X100, which shares the same ISO 15552 interface, 80 mm bore, 100 mm stroke, G3/8 port, and force. The SAI family also adds upgraded seals and SAIL/BSAI lock variants.
Because it is a double-acting double-rod cylinder, force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The bore is 80 mm, the air port is G3/8, the rod is 25 mm with an M20x1.5 thread, and speed is 30-800 mm/s. The safe working load is roughly 1361 N.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X100
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X100 replacement — usually within 7-8 hours.