This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID80X1000, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID80X1000, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X1000
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000
The AirTAC B06-SID80X1000 is an ISO 15552 double-acting double-rod cylinder where the rod exits both ends, yielding equal force in both directions (2268 N at 0.5 MPa). The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID80X1000. This SKU has no -S magnet and cannot carry a sensor. The bore dictates a G3/8 port and M20x1.5 rod thread.
This SID model is discontinued and replaced by the SAID80X1000 direct, sharing the same interface, 36 mm cushions, and 30-800 mm/s speed. The SAI upgrade uses a two Y-shaped one-way piston seal for low start-up pressure. A plain cylinder drifts on air loss; use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X1000 |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X1000 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X1000 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000 Is Used
Battery Cell Stacking
Equal both-ways force precisely indexes prismatic battery cells during stacking, ensuring parallel alignment without rotational drift.
Module Transfer
Drives dual-side conveyor stops in battery module assembly, using the back rod to carry a cam for synchronized part ejection.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000 with the B06-SAID80X1000
To replace the discontinued B06-SID80X1000, use the SAID80X1000 direct, reusing the ISO 15552 FA, LB, or TC mounts. Size both ways by checking neighbor bores (63 or 100) against the equal both-ways force. Choose a double rod when driving two tools or needing anti-rotation. For the 1000 mm stroke, use external guides to prevent rod bending. This non-magnetic SKU cannot take sensors.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X1000
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000 FAQ
Yes, it is discontinued. The direct replacement is the SAID80X1000. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the SID80X1000, so the SAID replacement matches the bore, stroke, G3/8 port, and mounting exactly.
Because it is a double-rod cylinder, force is equal both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. Speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X1000
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X1000 replacement — usually within 7-8 hours.