This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X125 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X125 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 125mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X125, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke125 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X125
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125
The AirTAC B06-SID80X125 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends on one piston, ensuring push and pull force are equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The B06- prefix marks this as AirTAC's battery-manufacturing dedicated variant of the SID80X125, mechanically identical to the base model with a 80mm bore, 125mm stroke, G3/8 port, and M20x1.5 rod thread. This SKU has no -S magnet and cannot take a magnetic switch.
This SID series is discontinued and the exact drop-in replacement is the SAID80X125, which reuses the same ISO 15552 mounting interface, bore, stroke, and adjustable 36mm air cushions. The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. For sizing, the equal-both-ways force yields a safe working load of roughly 1361 N (60% of the 0.5 MPa figure) and a vertical lift capacity of about 116 kg with a 2:1 margin. A plain cylinder drifts on air loss—the cushion only decelerates—so use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X125 |
| Bore size | Ø80 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X125 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X125 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125 Is Used
Battery Cell Stacking
Equal both-ways force drives precise electrode stacking and pressing in cell assembly without the rotational drift of single-rod actuators.
Module Tab Welding
The dual-rod configuration advances and retracts welding fixtures with matched 2268 N force, ensuring consistent contact on battery module tabs.
Pack Handling Transfer
Anti-rotation stability allows the rear rod to carry a cam or fixture while the front rod indexes battery packs between conveyor belts.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125 with the B06-SAID80X125
Replace the discontinued B06-SID80X125 directly with the SAID80X125, reusing your existing FA, LB, or TC ISO 15552 mounts without dimensional changes. Because force is equal both ways, size both extension and retraction by checking neighbor bores (63mm yields 1402 N @0.5 MPa; 100mm yields 3681 N @0.5 MPa) to match your 2268 N requirement. A double-rod design is right when you need anti-rotation stability or must drive two tools simultaneously from one piston. This non-magnetic SKU cannot support sensors; add the -S suffix on the SAID replacement if you need legacy CS1-B/DS1-B switch accuracy. For this 125mm stroke, side-load is minimal, but for any stroke >=300mm, ensure guide rails to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X125
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X125 FAQ
Yes, the B06-SID80X125 (AirTAC's battery-manufacturing dedicated variant of the SID80X125) is discontinued. The exact drop-in replacement is the SAID80X125. It shares the identical ISO 15552 interface, 80mm bore, 125mm stroke, G3/8 port, and mounting, but uses an upgraded two Y-shaped one-way piston seal for longer life.
Because a rod exits both ends, force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8. The safe working load is approximately 1361 N (60% of the 0.5 MPa figure). Note that the air cushion only decelerates near stroke end; it does not hold loads on air loss, so an external rod lock is required for vertical holding.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X125
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X125 replacement — usually within 7-8 hours.