This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X175 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X175 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X175, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X175
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175
The AirTAC B06-SID80X175 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends on one piston, making push and pull force equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID80X175, mechanically identical with an 80mm bore, 175mm stroke, G3/8 port, and M20x1.5 rod thread. This SID model is discontinued and end-of-life; the exact drop-in replacement is the SAID80X175, which reuses the same ISO 15552 mounting interface, bore, stroke, and port.
Because both faces use the rod-side area, the double-rod design provides anti-rotation stability and lets the back rod carry a sensor cam or drive two tools simultaneously. The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for low start-up pressure and long life. For sizing, the safe working load is roughly 1361 N (about 60% of the 2268 N @0.5 MPa figure), allowing a vertical lift of approximately 116 kg with a 2:1 margin. Note this SKU lacks the -S magnet and cannot take a magnetic switch; a plain cylinder does not hold loads on air loss, as the 36mm adjustable cushion only decelerates near stroke end.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X175 |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X175 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X175 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175 Is Used
Battery Cell Stacking
Equal both-ways force drives precision stacking presses in cell assembly, ensuring consistent pressure on both advance and retract strokes.
Module Handling Transfer
The double-rod anti-rotation特性 keeps battery modules stable during horizontal transfer between conveyor belts without drift.
Pack Tabbing Press
Drives two opposing tabbing tools simultaneously from one piston, maintaining perfect parallelism during battery pack welding.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175 with the B06-SAID80X175
To replace the discontinued B06-SID80X175, swap in the drop-in SAID80X175, which matches the 80mm bore, 175mm stroke, G3/8 port, and ISO 15552 mounting footprint exactly. Size both ways by confirming the required equal-both-ways force (2268 N @0.5 MPa) is sufficient, or step to neighbouring bores like 63mm or 100mm to scale the force. A double rod is right when you need anti-rotation stability or must drive two tools from one piston. Reuse FA, LB, or TC mounts directly. Because this SKU lacks the -S magnet, it cannot support sensing; if switches are needed, select an -S model. For this 175mm stroke, side-load alignment is acceptable, but for strokes >=300mm, ensure guide rails to prevent rod binding. For held loads, add an external rod lock or pilot-operated check valve, as air cushions only decelerate.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X175
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X175 FAQ
Yes, the B06-SID80X175 (battery-manufacturing dedicated variant of SID80X175) is discontinued. The exact drop-in replacement is the SAID80X175. It shares the same ISO 15552 interface, 80mm bore, 175mm stroke, G3/8 port, and mounting, but adds an upgraded two Y-shaped one-way piston seal for longer life.
Force is equal both ways at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8, the rod thread is M20x1.5, and it features a 36mm adjustable cushion at each end. Speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X175
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X175 replacement — usually within 7-8 hours.