This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X350S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X350S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 350mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X350S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke350 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X350S
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S
The AirTAC B06-SID80X350S is a double-acting, double-rod ISO 15552 cylinder where the battery-manufacturing dedicated B06- prefix denotes an industry-specific variant mechanically identical to the standard SID80X350S. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways (2268 N at 0.5 MPa). This model is discontinued; the exact drop-in replacement is the SAID80X350S, sharing the same 80mm bore, 350mm stroke, G3/8 port, M20x1.5 rod thread, and ISO 15552 mounting interface.
The SAI replacement introduces an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life. For motion logic, the back rod can drive a second tool or carry a sensor cam, while the equal-both-ways force provides anti-rotation stability. Based on the 0.5 MPa rating, the safe working load is roughly 1361 N (about 60% of force), translating to a vertical lift capacity of approximately 116 kg with a 2:1 margin. Note that air cushions only decelerate near stroke end; an external rod lock or SAIL/BSAI variant is required to hold loads on air loss.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X350S |
| Bore size | Ø80 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X350S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X350S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S Is Used
Battery Cell Stacking
Equal push and pull force ensures precise, anti-rotation alignment when stacking and pressing battery cells during module assembly.
Dual-Tool Tabbing
The rear extension rod drives a secondary sensor cam or handling tool simultaneously from the opposite end to sync operations.
Pack Handling Transfer
Provides stable, equal-force transfer of battery packs between conveyor lines without the stroke drift of single-rod units.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S with the B06-SAID80X350S
To replace the discontinued B06-SID80X350S, specify the SAID80X350S, which offers a true drop-in ISO 15552 interchange via mounting-interface dimensions (Basic, FA, LB, TC) without altering your battery-line tooling plates. Because force is equal both ways, sizing is straightforward: if 3175 N at 0.7 MPa is insufficient, step up to the 100mm bore, or drop to the 63mm bore (1962 N) for lighter tabbing or handling tasks. Choose a double-rod cylinder when you need anti-rotation resistance or must drive two synchronized tools from one piston. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches. With the 350mm stroke, external guides are recommended to mitigate rod-bending and side-load risks.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X350S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X350S FAQ
Yes, the B06-SID80X350S is discontinued. The exact drop-in replacement is the SAID80X350S. The B06- prefix simply marks it as the battery-manufacturing dedicated variant; mechanically it is identical to the SID80X350S. The SAID replacement shares the same 80mm bore, 350mm stroke, G3/8 port, and ISO 15552 mounting interface, but adds an upgraded piston seal.
Force is equal both ways due to the double-rod design: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. Operating pressure is 0.15-1.0 MPa. Speed ranges from 30-800 mm/s. It features a 25mm rod, M20x1.5 rod thread, and 36mm adjustable air cushions at each end. Air cushions only decelerate; use an external rod lock for load holding.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X350S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X350S replacement — usually within 7-8 hours.