This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X700S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X700S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X700S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X700S
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S
The AirTAC B06-SID80X700S is a double-acting double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant of the base SID80X700S, mechanically identical in every spec. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways (2268 N at 0.5 MPa). This model is discontinued and the drop-in replacement is the SAID80X700S, which adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. The bore is 80 mm, the port is G3/8, and the rod thread is M20x1.5.
Because the second rod can carry a sensor cam or drive two tools simultaneously while resisting rotation, double-rod designs excel in battery stacking and handling. The built-in magnet (-S) supports legacy CS1-B/DS1-B switches. For sizing, the safe working load is roughly 1361 N (about 60% of the 2268 N at 0.5 MPa figure), translating to a vertical lift of approximately 116 kg with a 2:1 margin. Note that air cushions only decelerate near stroke end; for held loads on air loss, use an external rod lock or the SAIL/BSAI lock variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X700S |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X700S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X700S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S Is Used
Battery Cell Stacking
Equal push and pull force ensures precise layering and compression of battery cells during module assembly, using the back rod for cam tracking.
Pack Handling Transfer
Drives dual-tool transfer arms on conveyor lines for moving battery packs, relying on the double-rod design to prevent rotational drift.
Tab Welding Press
Provides stable, equal-force clamping for battery tab welding operations, maintaining alignment without single-rod push imbalance.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S with the B06-SAID80X700S
To replace the discontinued B06-SID80X700S, specify the SAID80X700S—it preserves the 80 mm bore, 700 mm stroke, G3/8 port, M20x1.5 thread, and ISO 15552 mounting interface (Basic, FA, LB, TC). When sizing both ways, verify the equal force fits your needs: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. If this is excessive, step down to the 63 mm bore (1962 N at 0.7 MPa); if more force is required, step up to the 100 mm bore (5153 N at 0.7 MPa). A double rod is the right choice when you need anti-rotation stability, external cam tracking, or multi-tool driving. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches. Because the stroke is 700 mm, external guides are recommended to prevent rod bending under side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X700S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700S FAQ
Yes, the B06-SID80X700S (battery-manufacturing dedicated SID80X700S) is discontinued. The exact drop-in replacement is the SAID80X700S, which shares the same ISO 15552 interface, 80 mm bore, 700 mm stroke, G3/8 port, and mounting dimensions, but features an upgraded piston seal.
Because it is a double-rod cylinder, force is equal both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The air port is G3/8, the rod thread is M20x1.5, and speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X700S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X700S replacement — usually within 7-8 hours.