This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X75S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X75S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X75S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke75 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X75S
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S
The AirTAC B06-SID80X75S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID80X75S, mechanically identical with its 80mm bore, 75mm stroke, G3/8 port, and M20x1.5 rod thread. This SID model is discontinued and is fully replaced by the drop-in SAID80X75S.
The SAID replacement reuses the exact ISO 15552 mounting interface and adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure. Because both faces use the rod-side area, the back rod can carry a sensor cam or drive two tools without force mismatch. For sizing, the safe working load is roughly 1361 N (60% of the 2268 N @0.5 MPa force), yielding a vertical lift capacity of about 116 kg with a 2:1 margin.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X75S |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X75S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X75S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S Is Used
Battery Cell Stacking
Equal both-ways force ensures precise, jitter-free pressure during lithium cell stacking and alignment in module assembly.
Pack Handling Transfer
The double-rod architecture drives two synchronized pushers from one cylinder, ideal for transferring battery packs between conveyors.
Tab Welding Clamp
Anti-rotation stability from the dual rods keeps the clamping face perfectly aligned for battery tab welding operations.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S with the B06-SAID80X75S
To replace the discontinued B06-SID80X75S, specify the drop-in SAID80X75S, which matches the 80mm bore, 75mm stroke, G3/8 port, and 25mm rod. A double-rod design is correct when you need equal force both ways, anti-rotation stability, or a back rod for a sensor cam. You can reuse FA, LB, or TC mounts via the ISO 15552 interface. The -S suffix means the piston magnet is present for legacy CS1-B/DS1-B switches. For this 75mm stroke, side-load alignment is straightforward. Note that air cushions only decelerate; for load holding on air loss, use an external rod lock or the SAIL/BSAI lock variant.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X75S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75S FAQ
Yes, the B06-SID80X75S is discontinued. The exact drop-in replacement is the SAID80X75S. The B06- prefix simply denotes the battery-manufacturing dedicated variant of the base SID80X75S; the SAID replacement is mechanically identical, sharing the same ISO 15552 interface, 80mm bore, 75mm stroke, G3/8 port, and mounting.
Because it is a double-rod cylinder, force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The safe working load is approximately 1361 N. Operating speed is 30-800 mm/s. It uses a G3/8 port and features 36mm adjustable air cushions at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X75S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X75S replacement — usually within 7-8 hours.