Airtac BSAI Locking Clamp Cylinder BSAI32X175S
The AirTAC Airtac BSAI Locking Clamp Cylinder BSAI32X175S is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 175mm stroke and a spring-applied, air-released clamp-lock that holds the rod at ANY position along its travel — with a static holding force of 600 N.
- BoreØ32 mm
- Stroke175 mm
- Cylinder portG1/8
- TypeSingle rod (BSAI)
- Enclasp portG1/8
- Rod threadM10×1.25
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSAI Locking Clamp Cylinder BSAI32X175S
The AirTAC BSAI32X175-S is a double-acting ISO 15552 profile cylinder equipped with a spring-applied, air-released clamp-lock mechanism. A defining feature of this series is the ability to secure the piston rod at ANY position along its 175mm travel, delivering a static holding force of 600 N. It features a standard carbon steel rod and a -S magnet for position sensing. Unlike standard cylinders, this model operates within a 0.15-0.7 MPa pressure range to ensure safe unlocking.
It is vital to distinguish between the cylinder's thrust and the clamp's holding force. The 32mm bore generates 402 N of push thrust at 0.5 MPa, but the 600 N holding force is a separate mechanical grip applied directly to the rod by the enclasp unit. Remember that the variable air cushion only decelerates the piston near stroke ends; it does not hold the load. The clamp itself requires a third G1/8 pneumatic port to release the spring tension, and it only engages to hold the load after the rod has completely stopped moving.
Airtac BSAI Locking Clamp Cylinder BSAI32X175S Technical Specifications
| Model | Airtac BSAI Locking Clamp Cylinder BSAI32X175S |
|---|---|
| Series | BSAI ISO 15552 clamp-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Type | Single rod (BSAI), double acting |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| Lock type | Spring-applied, air-released clamp (any position) |
|---|---|
| Static holding force | 600 N |
| Enclasp / unlock port | G1/8 |
| Operating pressure | 0.15 – 0.7 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSAI datasheet (ISO 15552). Operating pressure is 0.15–0.7 MPa (lower than a plain SAI). Port options: PT / G.
How the Clamp-Lock Holds
static holding force (Ø32 mm)
A spring-applied gripper clamps the rod and holds the load at any position in the stroke — not just at the stroke end (that is a SAIL) — and it is bidirectional: it holds whether the rod was extending or retracting.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa (max) | 563 N | — |
Push/pull as tabulated. Rated to the 0.7 MPa operating maximum for this series. The clamp holding force (600 N) is separate from cylinder thrust. Size with a margin.
Where the Airtac BSAI Locking Clamp Cylinder BSAI32X175S Is Used
Vertical Axis Drop Prevention
Holds a 175mm vertical lift securely at any intermediate height with 600 N of static grip, preventing sudden drops during a power loss event.
Mid-Stroke Machining Hold
Locks the workpiece at a precise non-endpoint position for machining or inspection, ensuring the rod does not shift under lateral cutting forces.
Safety Interlock Positioning
Secures guard doors or heavy fixtures at variable open positions, engaging the spring-applied clamp only after the cylinder motion has fully stopped.
Is the Airtac BSAI Locking Clamp Cylinder BSAI32X175S the Right Clamp-Lock?
Select this 32mm bore model when an application requires intermediate positioning and drop prevention, stepping up from a plain SAI32 cylinder that only moves loads without securing them. If you previously used a SAIL32, which only locks at the stroke endpoints, the BSAI32X175-S is the necessary upgrade for mid-stroke holding. If your load only requires end-of-stroke positioning and no intermediate stops, a plain SAI remains the simpler choice. For safety, note that this clamp is not a dynamic brake; it locks only after the cylinder stops, and releasing the clamp requires balanced air pressure on both sides of the piston to prevent the rod from jumping abruptly. For critical human-safety loads, add an independent external safety measure.
This specific configuration includes a single carbon steel rod with an M10x1.25 thread, PT tapered port threads (1/8 cylinder port plus a G1/8 enclasp port), and a -S magnet compatible with AirTAC CMSE reed and DMSE electronic sensors. It supports the full BSAI single-rod mounting set (Basic, FA, FB, CA, CB, CR, LB, TC, TCM1, TCM2). If your load demands higher holding power, the neighbouring 40mm bore offers 628 N thrust at 0.5 MPa and a 900 N holding force.
Quick checklist
- ✓ Hold needed at any position?
- ✓ Or stroke-end only → use SAIL
- ✓ Holding force ≥ your load
- ✓ Balanced-pressure unlock circuit
- ✓ Extra safety measure for people
Airtac BSAI Locking Clamp Cylinder BSAI32X175S FAQ
The clamp-lock provides a static holding force of 600 N and can secure the rod at any point along the 175mm stroke. This bidirectional grip is spring-applied and air-released, functioning independently from the 402 N pneumatic thrust.
The clamp unlocks only when air pressure is balanced on both sides of the piston, preventing abrupt rod jumps. The -S magnet is precisely compatible with AirTAC CMSE reed switches and DMSE electronic sensors for accurate position detection.
Related AirTAC Lock & Standard Cylinders
Request a Quote for Airtac BSAI Locking Clamp Cylinder BSAI32X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.