Airtac BSED Clamping Double Acting Cylinder BSED32X80S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED32X80S combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 80mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke80 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X80S
The AirTAC BSED32X80S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal drive force of 345 N each way at 0.5 MPa. The bidirectional collet lock provides a 600 N static holding force with zero live air required.
This 32 mm bore unit includes a -S magnet for CMSE or DMSE sensors, adjustable air cushions at both ends, and a separate G1/8 release port. The lock engages only after the rod stops and releases when piston sides are pressure-balanced, requiring at least 0.5 seconds to transition safely.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X80S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X80S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X80S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X80S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X80S Is Used
Vertical Lift Gates
Holds a mid-stroke vertical gate securely with 600 N of fail-safe force during an E-stop, while the double rod provides equal 345 N lifting and lowering drive.
Pick-and-Place Arms
Uses the rear rod extension for a flag cam to trigger DMSE sensors, ensuring precise 80 mm strokes with symmetric force for balanced tooling mass.
Pallet Stops
Snags incoming pallets on a conveyor and locks position instantly on air loss, preventing drift while the 12 mm rod resists rotational torque.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X80S the Right Cylinder?
Select this 32 mm bore model when your application requires symmetric both-way force and a 600 N fail-safe hold. If your load exceeds 600 N, step up to the 40 mm bore, which provides 528 N both-way drive force at 0.5 MPa and a 900 N holding force. If you need less holding capacity, the BSED series does not offer a smaller bore, making 32 mm the minimum. Always ensure the load is stopped before engaging the lock, and allow at least 0.5 seconds for the release cycle after balancing piston pressures. For replacements, match the 80 mm stroke, PT1/8 cylinder port, and your chosen mounting style (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X80S FAQ
The integrated spring-applied collet instantly clamps the rod, providing a 600 N static holding force to prevent movement. It is a fail-safe hold, not a dynamic brake, so it must only engage after the rod has stopped.
The BSED32X80S delivers equal both-way drive force of 345 N at 0.5 MPa and 483 N at 0.7 MPa (max 49 kgf). The static holding force is 600 N, and the operational speed range is 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.