This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 10mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA
The AirTAC MSAL32X10CA is a discontinued single-acting push mini cylinder with a 32mm bore and 10mm stroke. Air extends the rod for the work stroke, while an internal spring retracts it to a fail-safe home when air is released. It delivers 317.7 N of usable push force at 0.5 MPa and 478.5 N at 0.7 MPa (already net of the return spring). The direct drop-in replacement is the MSBL32X10CA, which matches the bore, stroke, force, and G1/8 port.
This CA back-cover variant features a pivot clevis that swings on a pin to accommodate arcing loads. Because this specific SKU lacks the -S magnet code, it cannot accept a position sensor. As an upgrade note, the MSAL uses older CS1-M/DS1-M switches and threaded covers, whereas the MSBL replacement features a riveted rolling-packed body and uses CMSG/DMSG/EMSG sensors. End-of-stroke energy is absorbed by a fixed rubber bumper, not an adjustable cushion.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA Is Used
CNC Stamp Ejection
Uses the 317.7N push at 0.5MPa to eject small stamped metal parts from a die, relying on the 10mm stroke and spring return to clear the bed before the next cycle.
Packaging Flap Folders
Extends to fold cardboard carton flaps on a packaging line, where the fail-safe spring return guarantees the folder retracts out of the product path on air loss.
Pivot Arm Diverter
Leverages the CA pivot clevis to swing a diverter arm on a conveyor sorting chute, allowing the pin to absorb side-angle stress during the push stroke.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA
To replace this MSAL32X10CA with the MSBL32X10CA, confirm the 32mm bore, 10mm stroke, G1/8 port, PT thread, and CA pivot clevis. Remember the minimum operating pressure is 0.2 MPa to overcome the return spring. If you need to step down, the 25mm bore neighbor provides 176.4 N of push at 0.5 MPa; if you need more force, the 40mm bore neighbor provides 539.9 N at 0.5 MPa. Keep the short 10mm stroke for compact ejection, and never apply external load on the unpowered spring return stroke.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA FAQ
Yes, the MSAL32X10CA is discontinued. The exact drop-in replacement is the MSBL32X10CA, which matches the 32mm bore, 10mm stroke, CA pivot cover, and force class. You only need to update your sensor choice, as the MSBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
The usable push force (net of the return spring) is 76.6N at 0.2MPa, 317.7N at 0.5MPa, and 478.5N at 0.7MPa. The minimum operating pressure is 0.2 MPa because the compressed air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CA replacement with price, stock and lead time, usually within 7-8 hours.