This model is discontinued
AirTAC has phased out the MTAL series. You can still order this code here: we ship the direct replacement MTBL32X60SCM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 60mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the direct replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM
The AirTAC MTAL32X60SCM is a discontinued 32mm mini cylinder. It is single-acting pull, spring extend. Air retracts the rod; an internal spring extends it. Fail-safe home is extended. It delivers 261.2 N usable pull at 0.5 MPa.
The direct replacement is the MTBL32X60SCM. It keeps the 60mm stroke, G1/8 port, CM cover, and -S magnet. The MTAL uses threaded covers and CS1-M/DS1-M switches. The MTBL upgrades to a riveted body and CMSG/DMSG/EMSG sensors. A fixed rubber bumper absorbs end impact.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM Is Used
Injection Mold Ejector
Pulls an injection mold ejector pin back 60mm. Air retracts against mold pressure; spring extends if air drops.
Packaging Flap Tensioner
Draws back a carton sealing flap tensioner. Delivers 261.2 N pull at 0.5 MPa to hold film taut.
Pneumatic Gripper Close
Closes an external gripper on a metal stamping. Spring-extended fail-safe opens the jaws on air loss.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM
Replace this MTAL32X60SCM with the MTBL32X60SCM. Confirm the 32mm bore, 60mm stroke, M10x1.25 rod, G1/8 PT port, and CM round-end cover. The -S magnet changes sensor family from CS1-M/DS1-M to CMSG/DMSG/EMSG. Minimum pressure is 0.2 MPa. Apply no external load on the spring extend stroke. On air loss, the spring extends the rod.
To size, stepping down to bore 25 yields 137.2 N pull at 0.5 MPa. Stepping up to bore 40 yields 439.4 N at 0.5 MPa. The 60mm stroke is under the 100mm max, avoiding rod-bending side loads.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM FAQ
Yes, the MTAL32X60SCM is discontinued. The direct replacement is the MTBL32X60SCM. It matches the 32mm bore, 60mm stroke, G1/8 port, CM cover, and -S magnet.
Usable pull force is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa. Fail-safe home is extended. On air loss, the spring pushes the rod out. Min pressure is 0.2 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM replaces this model 1:1.
Fast Dispatch
MTBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X60SCM → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM)
Tell us the quantity and destination — we quote the direct AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X60SCM replacement with price, stock and lead time, usually within 7-8 hours.