This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU
The AirTAC MTAL32X75SU is a discontinued single-acting pull-type cylinder with a 32mm bore and 75mm stroke. Air retracts the rod to do the work, while an internal spring extends it back out when air is released. The fail-safe home position is extended. It delivers a usable pull force of 261.2 N at 0.5 MPa. The exact drop-in replacement is the MTBL32X75SU, matching the bore, stroke, U back cover, and G1/8 port.
This SKU includes the -S magnet, which uses the older CS1-M / DS1-M switches; the MTBL replacement upgrades to CMSG / DMSG / EMSG sensors. The MTAL features threaded covers and a self-lubricating front-cover guide, whereas the MTBL uses a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, and the 12mm carbon-steel rod has a 20 um hard chrome plating to resist wear.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU Is Used
Injection Mold Core Pull
Retracts a 32mm core pin during mold cycling with 261.2 N of pull at 0.5 MPa. The spring-extend fail-safe ensures the core pushes back out if shop air drops, preventing mold damage.
PCB Test Fixture Latch
Pulls a spring-loaded latch to release tested circuit boards. The CS1-M / DS1-M magnet confirms retraction, while the U flat-end back cover mounts rigidly to the test stand.
Packaging Flap Draw-back
Pulls a carton folding flap out of the way during product insertion. The fixed rubber bumper softens the 75mm pull stroke, and the spring extends the rod to clear the packaging path.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU
To replace this MTAL32X75SU, install the MTBL32X75SU. Confirm the 32mm bore, 75mm stroke, G1/8 PT port, M10x1.25 rod-end thread, and the U flat-end back cover. The -S magnet carries over, but you must switch from CS1-M / DS1-M to CMSG / DMSG / EMSG sensors. Maintain a minimum 0.2 MPa operating pressure, and apply no external load on the spring-extend stroke to avoid bending the rod.
When sizing, step down to the 25mm bore if you need less force (137.2 N at 0.5 MPa), or step up to the 40mm bore for heavier pulling (439.4 N at 0.5 MPa). At 75mm stroke, keep the load aligned to prevent side-loading and rod-bending.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU FAQ
Yes, the MTAL32X75SU is discontinued. The exact drop-in replacement is the MTBL32X75SU, which matches the 32mm bore, 75mm stroke, G1/8 port, and U back cover. You will need to upgrade your sensors from CS1-M / DS1-M to the CMSG / DMSG / EMSG family.
It is a single-acting pull cylinder with a fail-safe EXTENDED home. Air retracts the rod with a usable pull force of 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa. It requires a minimum of 0.2 MPa to overcome the internal return spring and operate.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75SU → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75SU replacement with price, stock and lead time, usually within 7-8 hours.