This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø40mm bore and 60mm stroke, G1/4 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA.
- BoreØ40 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeSingle acting, pull (spring extend)
- Rod threadM12×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA
The AirTAC MTAL40X60CA is a discontinued single-acting pull-type mini cylinder with a 40mm bore and 60mm stroke. Air retracts the rod while an internal spring extends it, yielding a fail-safe extended home position. It delivers a usable pull force of 439.4 N at 0.5 MPa. The direct drop-in replacement is the MTBL40X60CA, matching the bore, stroke, CA pivot cover, and G1/4 port.
This SKU features a CA back cover that swings on a pin to absorb arcing loads. Because it lacks the -S suffix, it cannot accept a position sensor. Upgrading to the MTBL replaces the MTAL's threaded covers with a riveted rolling-packed body, and shifts the legacy CS1-M / DS1-M sensor family to CMSG / DMSG / EMSG switches if a magnet is added later. The fixed rubber bumper absorbs end-of-stroke impact.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA carries the same single-acting ratings.
Usable Pull Force (Ø40mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 439.4 N |
| 0.7 MPa | 650.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA Is Used
Injection Mold Ejection
Pulls a secondary ejector pin back inside the mold plate against 439.4 N at 0.5 MPa. The spring-extend fail-safe ensures the pin clears the mold cavity if plant air drops.
Press Brake Tensioner
Draws a sheet metal hold-down strap tight on a press brake. The CA pivot cover swings freely to accommodate the arc of the moving beam during the 60mm pull stroke.
Packaging Flap Latch
Retracts a heavy mechanical latch to release filled cartons on a packaging line. The unpowered spring-extend home securely locks the latch between cycles.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA
To replace this MTAL40X60CA with the MTBL40X60CA, confirm the 40mm bore, 60mm stroke, G1/4 port, PT thread, and CA clevis mount. The single air line requires a 3/2 valve and a minimum 0.2 MPa working pressure to overcome the return spring. Remember that on air loss, the spring forces the rod out to the extended fail-safe position. Apply no external load on the spring extend stroke, as it is unpowered.
For sizing, stepping down to the 32mm bore drops the 0.5 MPa pull force to 261.2 N, while no larger standard bore exists in this series. This 40mm bore provides the maximum 0.5 MPa pull of 439.4 N and 650.4 N at 0.7 MPa.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA FAQ
Yes, the MTAL40X60CA is discontinued. The exact drop-in replacement is the MTBL40X60CA, which matches the 40mm bore, 60mm stroke, CA pivot cover, and G1/4 port. The MTBL upgrades the construction to a riveted rolling-packed body.
This single-acting pull cylinder provides a usable pull force of 439.4 N at 0.5 MPa and 650.4 N at 0.7 MPa. It operates on 0.2 to 1.0 MPa air pressure. Because this specific SKU lacks the -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CA replacement with price, stock and lead time, usually within 7-8 hours.