Airtac PB Pen-type Cylinder PB10X10SRLB
The AirTAC Airtac PB Pen-type Cylinder PB10X10SRLB is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 10mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X10SRLB
The AirTAC PB10X10SRLB is a JIS pen-size double-acting single-rod mini cylinder engineered for compact, high-frequency small-part motion. It features a slim SUS304 stainless steel barrel and piston rod, offering excellent durability in damp or mildly corrosive environments while keeping end-of-arm tooling exceptionally light. Delivering 39.3 N of push force at 0.5 MPa, this 10 mm bore unit is built for rapid cycling.
This specific configuration includes an R axial air inlet for in-line plumbing and an LB mounting bracket for secure attachment. The M5x0.8 port and M8x1.0 rod-end thread simplify integration. A built-in piston magnet (-S) allows position detection via AirTAC reed or electronic switches. End-of-stroke deceleration is handled by fixed TPU bumpers, which are not field-adjustable.
Airtac PB Pen-type Cylinder PB10X10SRLB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X10SRLB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X10SRLB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X10SRLB Is Used
PCB Pick & Place
Ideal for short 10 mm ejection strokes on SMT pick-and-place heads, where the slim stainless body saves payload and the S magnet confirms part release.
Blister Pack Sealing
Provides a fast 39.3 N push at 0.5 MPa to clamp thin blister card stock against a heated platen in compact packaging machinery.
Lab Dispenser Valving
Acts as a precise actuator for micro-valve switching on automated fluid dispensing lines, using the LB bracket for rigid frame mounting.
Is the Airtac PB Pen-type Cylinder PB10X10SRLB the Right Cylinder?
If you need less force, the Ø6 bore provides 14.2 N push at 0.5 MPa; stepping up to the Ø12 bore yields 56.5 N. Keep in mind a plain PB cylinder drifts when air is lost or the valve is centered, so an external rod lock is required for fail-safe holding. Confirm your ordering essentials: 10 mm bore, 10 mm stroke, M5x0.8 port, S magnet, R axial inlet, and LB mount.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X10SRLB FAQ
This 10 mm bore double-acting cylinder generates 39.3 N push and 33 N pull at 0.5 MPa. At the maximum operating pressure of 0.7 MPa, it yields 55 N push and 46.2 N pull. It operates on filtered air at 0.15-0.7 MPa, runs at 50-800 mm/s, and has a proof pressure of 1.2 MPa.
No, a plain PB-type cylinder does not hold its position or load when air is lost or the valve is centered; the piston will drift. The fixed TPU bumper only decelerates the piston near the stroke end and does not act as a lock. An external stop or rod lock is required for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X10SRLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.