Airtac PB Pen-type Cylinder PB12X130SU
The AirTAC Airtac PB Pen-type Cylinder PB12X130SU is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 130mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke130 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X130SU
The AirTAC PB12X130SU is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency motion. It provides a theoretical push of 56.5 N and pull of 46.7 N at 0.5 MPa, driven through an M5x0.8 air port. The slim SUS304 stainless round barrel and screwed-in covers keep weight down for light end-of-arm tooling, while resisting damp or mildly corrosive industrial environments.
This specific configuration includes a built-in piston magnet (-S) for position detection using AirTAC reed or electronic switches, and a U-type back cover featuring a 90-degree side air inlet for flat plumbing in tight spaces. Travel is managed by a fixed TPU bumper at each end that decelerates the piston over the final few millimeters. Because the 130 mm stroke is relatively long for the 5 mm rod, maintaining coaxial thrust is critical to prevent deflection.
Airtac PB Pen-type Cylinder PB12X130SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X130SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X130SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X130SU Is Used
PCB Depaneling Router
Pushes a light carrier fixture along a linear guide to position circuit boards under a cutting spindle, utilizing the 90-degree side inlet to keep pneumatic tubing flat against the machine frame.
Blister Pack Sorting
Extends 130 mm to deflect pharmaceutical blister packs into a reject chute during high-speed camera inspection, relying on the built-in magnet to confirm the stroke end position.
Lab Sample Dispenser
Actuates a small pipetting head to deposit reagents into test tubes, where the SUS304 stainless barrel withstands occasional chemical splashes and frequent washdowns.
Is the Airtac PB Pen-type Cylinder PB12X130SU the Right Cylinder?
When sizing this 12 mm bore actuator, consider stepping down to the 10 mm bore (39.3 N push at 0.5 MPa) for lighter duties, or up to the 16 mm bore (100.5 N push at 0.5 MPa) if you need greater thrust.
Confirm your ordering essentials: 12 mm bore, 130 mm stroke, M5x0.8 port, S magnet, and U 90-degree side inlet. Note that a standard PB body does not hold position if air pressure drops or the valve is centered; the piston will drift. You must add an external rod lock or mechanical stop for fail-safe load holding. Furthermore, the fixed bumpers are not adjustable, so metering out the exhaust or adding external shock absorbers is recommended when moving heavy tooling mass at high speeds.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X130SU FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 46.7 N. At the maximum operating pressure of 0.7 MPa, the push is 79.1 N and the pull is 65.4 N. The operating pressure range is 0.15-0.7 MPa, with a proof pressure of 1.2 MPa and a speed range of 50-800 mm/s.
No, a standard PB cylinder will drift if air is lost or the valve is centered, as the fixed TPU bumpers only decelerate the piston near the stroke end and do not act as a brake. For fail-safe vertical holding, you must install an external rod lock or mechanical stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X130SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.