Airtac PB Pen-type Cylinder PB12X15SU
The AirTAC Airtac PB Pen-type Cylinder PB12X15SU is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 15mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X15SU
The AirTAC PB12X15SU is a JIS pen-size double-acting single-rod mini cylinder engineered for high-frequency small-part motion. It features a 12mm bore and a 15mm stroke, delivering 56.5N of push force and 46.7N of pull force at 0.5MPa. The slim SUS304 stainless barrel and piston rod provide excellent durability in damp or mildly corrosive environments, keeping end-of-arm tooling lightweight.
This variant includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches, and a U-type back cover providing a 90-degree side air inlet for flat plumbing. The M5x0.8 port and M10x1.0 rod-end thread simplify integration. It relies on a fixed TPU bumper at each end to decelerate the stroke, and the Ø5mm rod is designed for pure coaxial thrust.
Airtac PB Pen-type Cylinder PB12X15SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X15SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X15SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X15SU Is Used
Blister Pack Sealing
Provides consistent downward pressure on a heat-sealing head, where the 90-degree side inlet keeps plumbing flush against the flat machine frame.
Lab Dispenser Valve
Toggles a precision needle valve for adhesive dosing, using the built-in magnet to confirm closed positions via an electronic switch.
Is the Airtac PB Pen-type Cylinder PB12X15SU the Right Cylinder?
When sizing this 12mm bore actuator, consider stepping down to the 10mm bore (39.3N push at 0.5MPa) for lighter tasks, or up to the 16mm bore (100.5N push at 0.5MPa) if you need greater thrust.
Because the fixed TPU bumper only absorbs impact over the final few millimeters, metering out the exhaust is recommended if moving real tooling mass at higher speeds. Note that a plain cylinder like this drifts when air pressure is lost or the valve is centered; an external rod lock is required for fail-safe load holding. Confirm your ordering essentials: 12mm bore, 15mm stroke, M5x0.8 port, S magnet, and U side inlet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X15SU FAQ
At 0.5MPa, the push force is 56.5N and the pull force is 46.7N. At the maximum operating pressure of 0.7MPa, the push force is 79.1N and the pull force is 65.4N. The operating pressure range is 0.15-0.7MPa, with a speed of 50-800mm/s.
No, a plain PB cylinder will drift if air is lost or the valve is centered. The fixed TPU bumpers only decelerate the piston near the stroke ends and do not act as a brake. You must add an external rod lock or mechanical stop for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X15SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.