Airtac PB Pen-type Cylinder PB12X15SULB
The AirTAC Airtac PB Pen-type Cylinder PB12X15SULB is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 15mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X15SULB
The AirTAC PB12X15SULB is a JIS pen-size double-acting mini cylinder engineered for compact, high-frequency motion. It features a 12mm bore and a 15mm stroke, generating 56.5 N of push force and 46.7 N of pull force at 0.5 MPa. The slim SUS304 stainless barrel and piston rod provide corrosion resistance for damp production areas while keeping weight low for end-of-arm tooling. Air connects via an M5x0.8 port.
This configuration includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches. The U code specifies a 90-degree side air inlet for flat plumbing, and the LB bracket supplies a rigid mounting interface. Travel is controlled by a fixed TPU bumper at each end that decelerates the piston over the final few millimeters. For higher speeds carrying real tooling mass, metering out the exhaust or fitting an external shock absorber is recommended, as the bumper is not adjustable.
Airtac PB Pen-type Cylinder PB12X15SULB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X15SULB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X15SULB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X15SULB Is Used
PCB Pick-and-Place
Drives a small vacuum gripper to lift electronic components, using the built-in magnet to confirm the 15mm retracted position before the gantry moves.
Blister Pack Sealing
Provides a short 56.5 N thrust to close sealing jaws on a pharmaceutical packaging line, where the LB bracket fixes the body securely against the machine frame.
Lab Dispense Valve
Actuates a micro-dispense nozzle for adhesive application, benefiting from the SUS304 stainless construction to withstand humid cleanroom environments.
Is the Airtac PB Pen-type Cylinder PB12X15SULB the Right Cylinder?
When sizing this 12mm bore actuator, stepping down to a 10mm bore yields 39.3 N of push force at 0.5 MPa, while stepping up to a 16mm bore provides 100.5 N. The Ø5 mm piston rod is designed for coaxial thrust, so if your application involves off-axis loads or longer strokes, adding an external linear bearing prevents side-load damage.
A plain double-acting cylinder does not hold its position if air pressure drops or the valve is centered; the piston will drift, and the end bumpers only decelerate travel near the stroke limits rather than locking the load. For fail-safe holding, an external rod lock or mechanical stop is required. Confirm your ordering essentials: 12mm bore, 15mm stroke, M5x0.8 port, S magnet, U side inlet, and LB mount.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X15SULB FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 46.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 79.1 N and the pull force is 65.4 N. The operating pressure range is 0.15-0.7 MPa, with a speed of 50-800 mm/s.
The U code provides a 90-degree side air inlet, allowing hoses to route flat against the machine surface rather than protruding axially. The LB bracket bolts the cylinder body firmly to a flat surface, providing a stable mounting interface for the 15mm stroke motion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X15SULB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.