Airtac PB Pen-type Cylinder PB12X30SU
The AirTAC Airtac PB Pen-type Cylinder PB12X30SU is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 30mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X30SU
The AirTAC PB12X30SU is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency motion. It features a 12mm bore and a 30mm stroke, generating 56.5 N of push force and 46.7 N of pull force at 0.5 MPa. The slim SUS304 stainless barrel and piston rod provide durability in damp or mildly corrosive environments while keeping weight low for end-of-arm tooling.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a U-type back cover that provides a 90-degree side air inlet for flat plumbing. Operating at speeds from 50-800 mm/s, it uses an M5x0.8 port and a fixed TPU bumper at each end to decelerate the stroke. The Ø5 mm rod utilizes an M10x1.0 rod-end thread for secure load coupling.
Airtac PB Pen-type Cylinder PB12X30SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X30SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X30SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X30SU Is Used
PCB Depaneling Jig
Actuates a routing blade or clamp on an electronics assembly line, utilizing the 90-degree side inlet to keep pneumatic plumbing flush against the machine frame.
Small Carton Flap Folder
Tucks cardboard flaps on a packaging conveyor, where the fixed TPU bumper adequately absorbs the impact of the 30mm stroke at moderate cycling speeds.
Lab Sample Dispenser
Drives a micro-pipette or valve block in a wet laboratory environment, benefiting from the SUS304 stainless construction to resist mild chemical corrosion.
Is the Airtac PB Pen-type Cylinder PB12X30SU the Right Cylinder?
When sizing this actuator, stepping down to a Ø10 bore yields 39.3 N of push force at 0.5 MPa, while stepping up to a Ø16 bore provides 100.5 N. For real-world work, plan for approximately 34 N of usable thrust at 0.5 MPa, which accounts for seal friction and smooth travel. Keep the thin Ø5 mm rod coaxial to prevent side-loading, as it is designed strictly for thrust. Confirm your ordering essentials: 12mm bore, 30mm stroke, M5x0.8 port, -S magnet, and U 90-degree side inlet. Note that a plain PB cylinder will drift and cannot hold a load if air pressure is lost; applying an external rod lock is necessary for fail-safe positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X30SU FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 46.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 79.1 N and the pull force is 65.4 N. The operating pressure range is 0.15-0.7 MPa, with a proof pressure of 1.2 MPa.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper only decelerates the rod near the end of the stroke and does not function as a locking brake. An external stop or rod lock must be fitted for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X30SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.