Airtac PB Pen-type Cylinder PB12X75U
The AirTAC Airtac PB Pen-type Cylinder PB12X75U is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 75mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X75U
The AirTAC PB12X75U is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It utilizes a slim SUS304 stainless steel round barrel and piston rod, offering reliable durability in damp or mildly corrosive work areas. Generating 56.5 N of push force at 0.5 MPa, it features a 12 mm bore, a 75 mm stroke, and a 90-degree U side air inlet for flat plumbing.
This model incorporates a fixed TPU bumper at each end to decelerate the piston over the final few millimeters of travel. Because the 5 mm piston rod is designed strictly for coaxial thrust, adding an external linear bearing is recommended if the application involves off-axis loading. The M5x0.8 port and M10x1.0 rod-end thread streamline integration into tight jigs and light end-of-arm robotic tooling.
Airtac PB Pen-type Cylinder PB12X75U Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X75U |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X75U
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X75U Is Used
PCB Depaneling Router
Pushes carrier boards into the routing bit fixture with precise 75 mm travel, utilizing the U side inlet to keep pneumatic plumbing flat against the machine frame.
Blister Pack Sealing
Cycles a small heat seal head up and down continuously, where the SUS304 stainless barrel withstands humid cleanroom environments.
Is the Airtac PB Pen-type Cylinder PB12X75U the Right Cylinder?
If you need to step down, the adjacent Ø10 bore provides 39.3 N of push at 0.5 MPa; stepping up to the Ø16 bore yields 100.5 N. A plain PB body does not hold its position if air pressure drops or the valve is centered, so an external rod lock is required for fail-safe load holding.
Confirm your ordering essentials to match this exact configuration: 12 mm bore, 75 mm stroke, M5x0.8 port, U 90-degree side inlet, and no sensor magnet. The fixed bumpers are not adjustable, so for high-speed cycles with real tooling mass, meter-out the exhaust or install an external shock absorber to prevent bottoming out.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X75U FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 46.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 79.1 N and the pull force is 65.4 N. The operating pressure range is 0.15-0.7 MPa, with a speed of 50-800 mm/s.
It uses a fixed TPU bumper at each end that decelerates the piston over the last few millimeters; it is not adjustable and not a locking brake. If air is lost, the piston will drift, so an external stop is required for fail-safe position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X75U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.