Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø12mm bore it gives a nominal 100mm stroke with a 50mm fine-adjustable window — settable from 50 to 100mm, so you set the end position without changing hardware.
- BoreØ12 mm
- Nominal stroke100 mm
- Adjust window50 mm
- Effective range50–100 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50
A rear adjuster screw and lock nut shorten the retract end, giving an effective stroke range of 50-100mm from a 100mm nominal length. The extend end remains fixed.
The slim SUS304 stainless body saves space in tight jigs and end-of-arm tooling. A fixed TPU bumper decelerates the last few mm at both ends. The M5x0.8 air port and M10x1.0 rod-end thread simplify integration. The thin Ø5mm rod handles coaxial thrust, so add an external guide for off-axis loads.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 100 mm |
| Adjustable window | 50 mm (50–100 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 46.7 N | 46.7 N |
| 0.7 MPa (max) | 65.4 N | 65.4 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50 Is Used
Changeover Fixtures
Set exact retract positions during product changeovers without machining new stops or reordering hardware.
Trial Stops
Dial in the exact 50-100mm stroke length during prototyping to find the perfect motion sequence safely.
Variable-Depth Insert
Adjust insertion depth on the fly for different material thicknesses without swapping the entire cylinder.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50 the Right Cylinder?
Remember that only the retract position is field-settable; the extend end is fixed. Re-tighten the lock nut after setting to prevent vibration drift. Confirm your ordering essentials: 12mm bore, 100mm nominal stroke, 50mm window, and mounting accessories.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 50–100 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50 FAQ
The effective stroke range is 50-100mm.
A rear adjuster screw with an M5x0.8 thread shortens only the retract end of the stroke. The extend end remains fixed. You must re-tighten the lock nut after setting to prevent vibration drift.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X100-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.