Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø12mm bore it gives a nominal 150mm stroke with a 30mm fine-adjustable window — settable from 120 to 150mm, so you set the end position without changing hardware.
- BoreØ12 mm
- Nominal stroke150 mm
- Adjust window30 mm
- Effective range120–150 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30
The AirTAC PBJ12X150-30 is a double-acting, double-rod pen-size mini cylinder with a 30mm adjustable window. A rear M5x0.8 adjuster screw shortens the retract end, giving an effective stroke range of 120-150mm. The extend end remains fixed.
The slim SUS304 stainless body saves space in tight jigs. A fixed TPU bumper cushions each end. The Ø5mm rod handles coaxial thrust; add an external guide for off-axis loads.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 150 mm |
| Adjustable window | 30 mm (120–150 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 46.7 N | 46.7 N |
| 0.7 MPa (max) | 65.4 N | 65.4 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30 Is Used
Variable-Depth Insertion
Dial in precise retract distances for pressing pins or plugs during prototype runs, using the rear screw to test multiple depths without swapping cylinders.
Changeover Fixtures
Switch product families on a packaging line quickly by adjusting the effective stroke from 120 to 150mm on the machine to accommodate different part heights.
Trial Stop Positioning
Set exact back stops for delicate electronic components, fine-tuning the retract end position during commissioning until the optimal travel is found.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30 the Right Cylinder?
Stepping down to a 10mm bore yields 39.3N, while a 16mm bore offers 100.5N. Choose based on your exact force needs. The M5x0.8 port matches the bore size. Remember the rear screw only tunes the back position; the extend end is fixed.
After dialing in the 120-150mm range, re-tighten the lock nut to prevent vibration drift. Confirm your ordering essentials: 12mm bore, 150mm nominal stroke, 30mm window, and mounting choice (LB or FA). No magnet is specified here.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 120–150 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30 FAQ
The effective stroke range is 120-150mm. Adjusting the stroke does not alter these force figures.
The rear M5x0.8 screw shortens only the retract end of the stroke; the extend end is fixed. You set the desired length between 120mm and 150mm, then re-tighten the lock nut to prevent vibration drift. The piston does not hold position on air loss, so use an external stop for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ12X150-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.