Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 125mm stroke with a 50mm fine-adjustable window — settable from 75 to 125mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke125 mm
- Adjust window50 mm
- Effective range75–125 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S
The AirTAC PBJ16X125-50S is a double-acting, adjustable-stroke pen-size mini cylinder with a built-in magnet. A rear adjuster screw and lock nut shorten the retract end, giving an effective stroke range of 75-125 mm from a 125 mm nominal length. The extend end remains fixed. The M5x0.8 air port and Ø5 mm stainless rod suit tight jigs.
The slim SUS304 stainless body includes a fixed TPU bumper at each end. The Ø5 mm piston rod handles coaxial thrust well, but over this 125 mm stroke an external guide prevents side-load wear.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 125 mm |
| Adjustable window | 50 mm (75–125 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -50 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S Is Used
Changeover Fixtures
Dial in the retract stop from 75 to 125 mm during product changeovers, locking the nut to secure the new position without swapping hardware.
Trial Insertion Stops
Test variable insertion depths on prototypes by turning the rear screw, finding the exact position before committing to a fixed-length cylinder.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S the Right Cylinder?
If you need less force, step down, but choose this 16 mm model if your load approaches 60 N of real work. Remember that only the retract position is field-settable; the extend end is fixed. Always re-tighten the M5x0.8 adjuster lock nut after tuning to prevent vibration drift. Confirm your bore, 125 mm stroke, 50 mm window, S magnet, and mounting accessories before ordering.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 75–125 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S FAQ
The adjustable window is 50 mm, yielding an effective stroke range of 75-125 mm. The air port is M5x0.8.
The rear screw shortens only the retract end, while the extend end remains fixed. You must re-tighten the lock nut after setting to prevent vibration drift. The S magnet works with AirTAC reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X125-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.