Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 15mm stroke with a 10mm fine-adjustable window — settable from 5 to 15mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke15 mm
- Adjust window10 mm
- Effective range5–15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10
The AirTAC PBJ16X15-10 is a JIS pen-size double-acting mini cylinder with a 10mm adjustable window, yielding an effective stroke range of 5-15mm. A rear M5x0.8 adjuster screw shortens the retract end, while the extend position remains fixed.
The slim SUS304 stainless body includes a fixed TPU bumper at each end to decelerate motion near the stroke limits. The Ø5mm piston rod uses an M10x1.0 rod-end thread, and the air port is M5x0.8.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 15 mm |
| Adjustable window | 10 mm (5–15 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10 Is Used
Insertion Depth Tuning
Dial in precise press-fit depths on the machine without swapping cylinders, using the 5-15mm retract adjustment to test multiple insertion parameters quickly.
Changeover Fixtures
Adapt lightweight jig stops for different product runs by turning the rear screw, saving downtime and eliminating the need for custom spacer hardware.
Trial Positioning Stops
Set temporary end-of-stroke limits during prototype development, locking the nut once the exact 5-15mm travel window is confirmed for the process.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10 the Right Cylinder?
Remember that the rear screw modifies the retract position only; the extend end is fixed. Always re-tighten the lock nut after setting your desired length to prevent vibration drift.
Confirm your ordering essentials: 16mm bore, 15mm nominal stroke, 10mm window, no magnet, and your preferred mounting. The thin Ø5mm rod is built for coaxial thrust, so if your application involves off-axis loads or longer strokes, add an external linear guide to prevent side-loading damage.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 5–15 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10 FAQ
The effective stroke range is 5-15mm. At 0.5MPa, push is 100.5N and pull is 90.7N. At the maximum 0.7MPa operating pressure, push is 140.7N and pull is 126.9N. These figures match a standard PB cylinder of the same bore.
The rear M5x0.8 screw shortens the retract end of the stroke, while the extend end remains fixed. You must re-tighten the lock nut after setting the position to prevent vibration drift. The cylinder does not hold position on air loss, so an external rod lock is needed for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.