Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 150mm stroke with a 50mm fine-adjustable window — settable from 100 to 150mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke150 mm
- Adjust window50 mm
- Effective range100–150 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50
The AirTAC PBJ16X150-50 is a double-acting, double-rod pen-size mini cylinder with a 50mm adjustable stroke window. A rear adjuster screw shortens the retract end, giving an effective stroke range of 100-150mm. The extend end remains fixed.
The slim body features a SUS304 stainless barrel and a fixed TPU bumper at each end. The M5x0.8 air port and M10x1.0 rod-end thread match the 16mm bore standard. The Ø5mm rod is built for coaxial thrust, so over this 150mm length add an external guide to prevent side-load wear.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 150 mm |
| Adjustable window | 50 mm (100–150 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50 Is Used
Variable-Depth Insertion
Dial in exact press-in depths for different product variants on the same jig using the 100-150mm effective range.
Changeover Fixtures
Quickly reset the retract length for new part heights without disassembling the cylinder or ordering new hardware.
Trial Stroke Stops
Fine-tune end positions during machine commissioning to find the exact travel before locking the nut.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50 the Right Cylinder?
To size correctly, compare this 16mm bore against its neighbours. Stepping down to a 12mm bore drops the 0.5MPa push force to 56.5N, whereas this 16mm unit provides 100.5N. Remember that only the retract position is field-settable; the extend end is fixed. Always re-tighten the lock nut after tuning the screw to prevent vibration drift. Confirm your ordering essentials: 16mm bore, 150mm nominal stroke, 50mm window, and any mount accessories.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 100–150 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50 FAQ
The effective stroke range is 100-150mm.
The rear screw shortens the retract end only; the extend end is fixed. You must re-tighten the lock nut after setting to prevent vibration drift. A plain cylinder does not hold position on air loss, so use an external stop for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X150-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.