Airtac PCF Female Thread Straight Fitting PCF802D
The AirTAC Airtac PCF Female Thread Straight Fitting PCF802D is a genuine female connector for push-in tube connection, rated 0 - 1.0 MPa (0 - 10 kgf/cm2) with a 1.5 MPa proof pressure.
- TypeFemale connector
- SeriesPCF
- Working pressure0 - 1.0 MPa (0 - 10 kgf/cm2)
- Proof pressure1.5 MPa
- Temperature-20 to +70 °C
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PCF Female Thread Straight Fitting PCF802D
The PCF802D is an AirTAC PCF one-touch female connector: a fitting whose threaded side is an internal 1/4in PT port and whose other side grips an 8mm outside diameter soft nylon or polyurethane tube. The D suffix makes the body black rather than the standard grey, which helps the fitting disappear against dark machine frames and enclosures. Push the tube straight into the chuck and the stainless spring gasket plus POM chuck grip it immediately; press the POM release ring and the tube slides back out for rework.
This part belongs to the resin and brass profile, not the metal BPC line: working pressure 0-1.0 MPa (0-10 kgf/cm2), vacuum down to -750 mmHg, proof pressure 1.5 MPa, and a temperature window of -20 to +70 C. The thread arrives with sealant already applied, so no extra tape or paste is needed before screwing it onto a male stud or nozzle. Materials include a PBT body, brass stud, aluminium-alloy guide and an NBR O-ring sealing the tube.
Airtac PCF Female Thread Straight Fitting PCF802D Technical Specifications
| Model | Airtac PCF Female Thread Straight Fitting PCF802D |
|---|---|
| Type | Female connector |
| Series | PCF |
| Connection | Push-in one-touch |
| Working pressure | 0 - 1.0 MPa (0 - 10 kgf/cm2) |
|---|---|
| Negative pressure | -750 mmHg (10 Torr) |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Applicable tubing | Soft nylon or polyurethane tube |
| Thread standard | PT (Rc tapered) unless the code says otherwise |
POM release button and chuck, aluminium-alloy guide, stainless spring gasket, NBR O-ring; body brass or PBT depending on the part. AirTAC publishes flow as a characteristic curve rather than a single figure, so no L/min value is listed.
Model Code: Airtac PCF Female Thread Straight Fitting PCF802D
| PCF | Female connector. |
|---|---|
| 4 / 6 / 8 / 10 / 12 | Tube outside diameter in mm (3.2 mm exists on the mini series). |
| M5 / 01 / 02 / 03 / 04 | Thread: M5x0.8, 1/8", 1/4", 3/8", 1/2" (M3 on the mini series). |
| D | Black. Blank = grey. |
Fitting & Sealing Notes
- check Cut the tube square and clean before pushing it home, or the seal will leak.
- check Push until it stops, then pull back to check the chuck has gripped.
- check To release, press the collet ring fully in and pull the tube out.
- check Threaded parts arrive with sealant on the thread; M5 sizes use a sealing gasket.
- check Match the tube OD exactly - a 6 mm fitting will not hold 1/4" tube.
Where the Airtac PCF Female Thread Straight Fitting PCF802D Is Used
Solenoid valve outlet plumbing
Screws directly onto the 1/4in male outlet of a 5/2 or 3/2 solenoid valve on a pneumatic control manifold, letting 8mm hose run out to the cylinder without an extra nipple.
Packaging machine FRL drop
On a carton-sealing or shrink-wrap machine, the female thread picks up the male port of the filter-regulator-lubricator, and the black body blends with the dark guarding around the frame.
Control panel hose take-off
Inside an electrical cabinet where the air drop passes through, a 1/4in internal thread mates with a threaded bulkhead stud, and the 8mm side feeds distribution blocks or small actuators.
Is the Airtac PCF Female Thread Straight Fitting PCF802D the Right Part?
Dia 8 with a 1/4in port is the workhorse pairing on a 1/4in manifold stub. Step down to the Dia 6 version when you are feeding a compact gripper or a small pilot line where stiffness of the larger hose is awkward to route; step up to Dia 10 when the run is long or the actuator cycle clearly wants more bore. Both neighbours exist on this 1/4in thread. If your port is only 1/8in, the same female shape is offered in that size too.
Choose a female connector over a male stud type when the mating part already has male threads exposed - a solenoid valve outlet, an FRL port or a machine-mounted nozzle. Check the thread standard: this catalogue is PT, so a G or NPT port needs adaptation rather than forcing the fitting in. And match the tube exactly - an 8mm chuck will not seal on 5/16in or 10mm hose no matter how hard it is pushed in.
Quick checklist
- ✓ Tube outside diameter matches exactly
- ✓ Thread size and standard match the port
- ✓ Working pressure within 0 - 1.0 MPa (0 - 10 kgf/cm2)
- ✓ Temperature within -20 to +70 °C
Airtac PCF Female Thread Straight Fitting PCF802D FAQ
Tube side accepts 8mm OD soft nylon or polyurethane tubing; threaded side is a 1/4in PT female port. Working pressure is 0-1.0 MPa (0-10 kgf/cm2), vacuum down to -750 mmHg, proof pressure 1.5 MPa, and the operating temperature range is -20 to +70 C. The body is PBT with a brass stud, and the D suffix means the body is black. Thread standard is PT throughout this catalogue.
No. AirTAC ships threaded one-touch fittings with sealant already applied to the thread, so the 1/4in female port can go straight onto a clean male stud or nozzle. Only M5 sizes in the range use a sealing gasket instead. Make sure the mating male thread is undamaged and free of old tape, because reusing sealant-wrapped ports with fresh sealant can jam the thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC One-Touch Fittings
Request a Quote for Airtac PCF Female Thread Straight Fitting PCF802D
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.