Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 50mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke50 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A
The AirTAC SAIF100X50S-10S is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a 30.0 mm2 orifice (Cv 1.68) for high flow. Driven by an AC220V terminal coil (3.5 VA, IP65, 0.05s response), it switches itself from one signal. The cylinder port is PT1/2 while the valve port is PT3/8, connected via PU tubing (O10 x O6.5). Because the valve limits pressure, the practical operating range is 0.15-0.8 MPa.
This 100mm bore unit generates 3927N push force at 0.5 MPa and includes a magnet for CMSE reed and DMSE electronic sensors. Factory-set to retract when energised, the valve can be repositioned to extend on signal. It eliminates remote valves, saving tubing and panel space for decentralized stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×50 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A Is Used
Decentralized Assembly Lines
Eliminates remote valve banks by switching locally via the AC220V terminal coil, minimizing tubing across large factory layouts.
High-Force Clamping
Delivers 3927N push force at 0.5 MPa directly at the work point, perfect for heavy-duty machining clamps without separate valves.
Retrofit Automation
Ideal for machine upgrades where running new pneumatic lines to a central panel is costly, using the integrated 4M310-10 valve.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A the Right Choice?
Choose this 100mm bore for high-thrust needs up to 3927N at 0.5 MPa; if lower force is acceptable, stepping down to the 80mm bore yields 2513N push force at 0.5 MPa. A self-valved SAIF beats a separate cylinder plus remote valve by cutting plumbing and wiring, ideal for decentralized machine stations. Note that the 5/2 valve routes air but does not lock loads—use SAIL for holding. This SKU specifies a 50mm stroke, PT3/8 valve port, AC220V terminal coil, PT threads, and a -S magnet. For any application over 300mm stroke, add external guide supports to prevent rod side-loading.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A FAQ
The 100mm bore generates 3927N push force at 0.5 MPa. The built-in 4M310-10 5/2 valve provides a 30.0 mm2 effective area (Cv 1.68) with a max frequency of 4 cycles/sec.
It uses an AC220V terminal entry coil (3.5 VA, IP65). Factory-set to retract when energised, the 5/2 valve can be repositioned to extend-when-energised. It switches directly from one coil signal, so no separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X50S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.