Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 150mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke150 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A
The AirTAC SAIF32X150S-06A is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, offering a Cv of 0.78 and a 14.0 mm2 effective area. Driven by an AC220V terminal coil consuming 3.5 VA, it activates in 0.05 seconds. The cylinder body features a PT1/8 port, while the integrated valve uses a 1/8 inch port, connected internally via an O8 x O5 PU tube. Equipped with a magnet for CMSE reed and DMSE electronic sensors, this unit provides 402N of push force at 0.5 MPa.
Although the cylinder body rates to 1.0 MPa, the built-in valve operates at 0.15-0.8 MPa, making the practical working range 0.15-0.8 MPa. The factory default retracts the piston rod when the coil is energised, but you can reposition the valve to extend when energised. By switching itself from one coil signal, it eliminates remote valves and reduces tubing, ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×150 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A Is Used
Decentralized Assembly Lines
Eliminates the need for long tubing runs from a central valve island, allowing direct cylinder control at each station.
Compact Clamping Fixtures
Provides localized 402N clamping force without consuming valuable panel space for external valves.
Space-Constrained Machinery
The integrated valve manifold and profile barrel design fit into tight machine frames where separate valves would not fit.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A the Right Choice?
Choose this self-valved SAIF32X150S-06A when you need decentralized actuation in tight spaces, saving panel space and plumbing compared to a separate cylinder and remote valve. If your application requires more thrust, stepping up to a 40mm bore yields 628N push force at 0.5 MPa, but the 32mm bore is excellent for lighter loads. At 150mm stroke, ensure your mechanism handles potential side loads with an external guide. Remember that the 5/2 valve routes air and is not a lock; for position holding under pressure loss, select a SAIL lock cylinder. To match this unit for replacement, confirm the 32mm bore, 150mm stroke, 1/8 valve port, AC220V terminal coil, PT thread, and the -S magnet option.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A FAQ
At 0.5 MPa, it provides 402N of push force and 345N of pull force. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a Cv of 0.78 and a max frequency of 5 cycles per second.
Yes, the factory setting retracts the rod when the AC220V coil is energised, but you can reposition the 5/2 valve to extend-when-energised. It holds position via pilot pressure, not a spring, so no separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.